Going Insane at RCBOATBUILD

[properchopper]

Wow - thanks for the kind words . I work hard to deliver strongly built, well tuned builds. Takes time, lots of attention to detail and some creativity thrown in for good measure.

An FE30 on the bench with customer-supplied Leo motor (servo for alignment purposes only)

DSC06014.jpgDSC06013.jpgDSC06015.jpg

[mitchesx]

FINALLY got my second outing of the season today... All I can say is WOW! This boat was incredibly fast out of the box. Had a hard time keeping it on the water, but I think I am just a few adjustments and a little work on the COG away and it will be awesome. What a great platform to start from. Nice job! My Fe30 was out today too, and that boat is just consistent. Thanks Tony! Bring on the Skiff!

Steve's crossing over to the "sparky" side. His MM V2 should be a great start.

TP Power 4050 3Y 2220KV ; T-180 ; 4S2P ; Spd hardware. I kept the layout super sanitary
(Steve'll add his own graphics)

[ATTACH=CONFIG]111597[/ATTACH] [ATTACH=CONFIG]111598[/ATTACH]

[ATTACH=CONFIG]111599[/ATTACH] [ATTACH=CONFIG]111600[/ATTACH]

[properchopper]

Thanks again Sir. Every boat needs a little fine tuning of the settings to find the sweet spot for your individual running style. Enjoy

[mitchesx]

Here is a video of the Mean Machine that Tony set up for me. This boat really moves! I hit the thermal barrier at the end of the run, so I'm gonna have to prop it down. Tony did a great job, and thanks to my special someone for taking the video. We lost the focus, but you'll definitely get the idea!

https://www.youtube.com/watch?v=m2rt6sH8jwE

[Luck as a Constant]

Yesway

[properchopper]

Here is a video of the Mean Machine that Tony set up for me. This boat really moves! I hit the thermal barrier at the end of the run, so I'm gonna have to prop it down. Tony did a great job, and thanks to my special someone for taking the video. We lost the focus, but you'll definitely get the idea!

https://www.youtube.com/watch?v=m2rt6sH8jwE

Steve,

Thanks for posting the vid - It's definitely rewarding for me to see one of my builds run so nicely - Your MM is WAAY fast & corners on RAILS - I really hadn't expected it to be that fast To unload the powerplant with that prop you can raise the strut vertically a bit ; 1/8" to even 1/4" BUT probably easier to prop down & test.

[ron1950]

tony and I have been trying to get the skiff class going for awhile now..its really good in fla now with 4 or 5 boats here is a fun run with mine a few months ago

https://www.youtube.com/watch?v=copS0hZjxR0

[properchopper]

tony and I have been trying to get the skiff class going for awhile now..its really good in fla now with 4 or 5 boats here is a fun run with mine a few months ago
https://www.youtube.com/watch?v=copS0hZjxR0

Yours runs really, really nice - good job ! I still can't get anyone out here on the FE skiff bandwagon I still have the fresh yellow hull available BTW.

[mitchesx]

I have one... I just don't race...

[jaike5]

Heading up to Canada

"Pure as the Driven Snow" in white - :

[ATTACH=CONFIG]114252[/ATTACH] [ATTACH=CONFIG]114253[/ATTACH]


All builds are leak tested before releasing to owner :

[ATTACH=CONFIG]114254[/ATTACH]


Interior Layout for P-Sport:

[ATTACH=CONFIG]114255[/ATTACH]


Tony
rcboatbuild@hotmail.com


[ATTACH=CONFIG]114256[/ATTACH]

Well Tony,........... this FE30 is extremely quick and smooth riding. Don't know what else to say but Thanks Man !!

[ron1950]

tony where do u get your o rings for the stuffing tube epoxy seal?

[Fluid]

I get mine in the plumbing department of ACE Hardware....



.

[Luck as a Constant]

I get mine in the plumbing department of ACE Hardware....



.

Yup. They can be found in the plumbing section of any hardware store


Sent from my iPad using Tapatalk

[properchopper]

I get mine in the plumbing department of ACE Hardware....




.

[hilyfe]

Nice looking boats
I sent in my email inquiry :)