Going Insane at RCBOATBUILD

[properchopper]

That hull looks fast and stable. I have seen a lot of very loose boats in this class. Half do not finish heat.

It's been said that, theoretically at least, ride-pad hulls don't do well in the rough. 100_0112.jpg

My other JC30 (current P-Ltd Mono NAMBA SAW record holder) out for a stroll in "mild" chop

http://www.youtube.com/watch?v=qkiTfVT1LaE

[properchopper]

Dave's beautiful Blue FE30 "Convertible"

Dave wants to race P-Ltd. with the option of changing motors to go P-Sport. Narrowed the T-180 to allow 4S2P batteries to fit beside the ESC. A .150 cable with teflon is installed with the option of pulling out the teflon and putting in a .187 cable I supplied trimmed to fit to "convert" to the P-Sport configuration with a bigger motor..

DSC04789.JPG

Motor mount, quickchange servo mount, solid waterline to clear servo mechanism, matching blue servo rod

DSC04775.JPG


ESC platform keeps ESC off bottom in case of slosh

DSC04785.JPG

Sharp blue hull. Dave special-ordered early-style cowl instead of later model turbine cowl.

DSC04733.JPG

[properchopper]

Dave's 23" DF Sniper Ballistic Missle

DSC05042-1.JPG

To replace his last one that "got away", Dave had me build this gorgeous ballistic missle. A TP Power motor, T-120, and Dinogy 65C/130C 2S 5000's and considerable attention to detail including carbon/kevlar inlays this should be entirely capable of low-earth orbit



DSC05043-1.JPG


DSC05067.JPG DSC05060-1.JPG

[Brushless55]

Looks good Tony!
What size motor and kv?

[rickwess]

Any inside pics? How much harder is it working on the smaller hulls?

[HydroMike]

Looks good tony

[properchopper]

Motor : TP POWER 2935 6Y 2270KV

It seems that the small hulls take much longer ; this one took 3 weeks (but it was worth the extra time - I'm really proud of this build)

Thanks Mike !

[srislash]

That looks sweet Tony.

[properchopper]

That looks sweet Tony.

Thanks Shawn - I poured my heart into this one

[srislash]

Thanks Shawn - I poured my heart into this one

So do those scoops come with those hulls or an option? Been keeping an eye on scoops but nothing has struck my fancy yet. Those ones look great on there.

[TristanJones]

You do great work Tony. I hope Jeff hasnt shipped my hull already so you can get mine ready for me.

[properchopper]

Mean Machine V2 with P-Power

Steve's crossing over to the "sparky" side. His MM V2 should be a great start.

TP Power 4050 3Y 2220KV ; T-180 ; 4S2P ; Spd hardware. I kept the layout super sanitary
(Steve'll add his own graphics)

DSC05406.JPG DSC05407.JPG

DSC05408.JPG DSC05402.JPG

[rayzerdesigns]

guess ur gonna have to build my mean machine for me

[properchopper]

Steve's next entry into the "sparky" side : A P-Ltd Sport FE30. This green on black hull is so strikingly bright that Steve'll need sunglasses just to look at it (pictures don't do it justice) - I think there's Kryptonite in the gelcoat

DSC05418.JPGDSC05435.JPG

I configured the layout to allow a single 4S 5000 in front of the ESC or 2 X 2S 5000's in series

DSC05438.JPG

Graphics will be added soon

DSC05436.JPG

[TheShaughnessy]

I like how you put flotation in every possible spot. Must come from experience.