Going Insane at RCBOATBUILD

[properchopper]

Tristan's P-Sport FE30

Tristan wisely chose the TP Power 3Y 2220KV motor / Swordy Pro 220A+ combo. This should be a ballistic missle !

Laser employed to find/align stuffing tube slot to the strut. Perfect alignment to the motor collet means less vibration/noise/parasitic driveline drag

DSC05471.JPGDSC05472.JPGDSC05475.JPG


DSC05494.JPG

Back to the shop for shipping

DSC05501.JPG

[TristanJones]

That is officially a bad ass mofo.
Thank you very much Tony, you build a mean boat.
Anyone thinking about using the service Tony provides would be mad not to. great price, better work, 100% awesome comunication.
Pleasure to deal with!

[mitchesx]

Tony - I just saw these! Awesome! Looking forward to spring! I echo Tristan's comments! I'm so happy with Tony and his work, I asked him to build my skiff. Plans are already in motion! Thanks again Tony!

Steve's next entry into the "sparky" side : A P-Ltd Sport FE30. This green on black hull is so strikingly bright that Steve'll need sunglasses just to look at it (pictures don't do it justice) - I think there's Kryptonite in the gelcoat

[ATTACH=CONFIG]111842[/ATTACH][ATTACH=CONFIG]111843[/ATTACH]

I configured the layout to allow a single 4S 5000 in front of the ESC or 2 X 2S 5000's in series

[ATTACH=CONFIG]111844[/ATTACH]

Graphics will be added soon

[ATTACH=CONFIG]111845[/ATTACH]

[properchopper]

Dave's FE Jersey Skiff

Dave's in for some serious good times once he gets this on the water (after some paint/graphics). I firmly believe that the FE Jersey Skiffs are the best-kept secret in FE for pure fun on the water

DSC05574.JPGDSC05596.JPGDSC05579-1.JPG

[properchopper]

Delta Force 26 SAW Race Build for P-Ltd Mono

This was a last-minute entry to beat my existing NAMBA P-Ltd Mono SAW record. I might have done better (my current record with the JetChopper30 still stands) had I remembered to bring my batteries to the course for the one day I had to defend the record .

DSC05322.JPGDSC05316-1.JPGDSC05313.JPG

[properchopper]

Hydro & Marine Drifter S NAMBA SAW Record Holder

As I'm updating this thread I feel it's ProperChopper appropriate to finally give due respect to this amazing boat- a three-time NAMBA SAW Record Holder : P-Ltd Offshore 67.771mph; P-Ltd Cat original record 66.176mph and current P-Ltd Cat record of 67.060mph. [Plus three fast passes of 71mph]

Thanks to Mike (Chili) for long ago selling me this hull and "Snowman" Brian B. for providing the "El-Kabongo" record prop

DSC05721.JPGDSC05724.JPG


Few hulls fully "Air Out" like an H&M

drifter 10.jpg



On the way to a record (not theses passes but close)

https://www.youtube.com/watch?v=E4CDKEKzwdE

[Brushless55]

This week is our first race of the season and I have a FE30 to try out in limited Hydro for the first time

[TristanJones]

Thanks Tony!!!

[mitchesx]

This one's mine too!

Dave's in for some serious good times once he gets this on the water (after some paint/graphics). I firmly believe that the FE Jersey Skiffs are the best-kept secret in FE for pure fun on the water

[ATTACH=CONFIG]113945[/ATTACH][ATTACH=CONFIG]113946[/ATTACH][ATTACH=CONFIG]113947[/ATTACH]

[properchopper]

Jay's P-Sport FE30

Heading up to Canada

"Pure as the Driven Snow" in white - :

DSC05749.JPG DSC05750.JPG


All builds are leak tested before releasing to owner :

DSC05739.JPG


Interior Layout for P-Sport:

DSC05748.JPG


Tony
rcboatbuild@hotmail.com


DSC05492-1.JPG

[properchopper]

Another Striking Green P-Sport FE30

Love this color !

DSC05812-1.JPG

Laser technique for finding stuffing tube hole location that perfectly aligns stuffing tube/flex with strut entry

DSC05826.JPG


DSC05830-1.JPG DSC05831.JPG

(continued next post)

[properchopper]

Green FE30 P-Sport continued

shaft polished & sealed with GFlex

DSC05841.JPGDSC05843.JPG

TP 4050 3Y & Swordfish 220A 6S Pro with sharp looking black finned cooler + 90 degree fittings to keep waterlines, which tuck into holes pre-drilled in motor mount neat & tight. Solid brass waterline carries past servo arm to prevent interferance with arm. Traxxas waterproof servo, and at customer's request, the Traxxas waterproof Rx enclosure


DSC05847.JPG

DSC05856.JPG



DSC05872.JPG

Tony
rcboatbuild@hotmail.com

[HydroMike]

I agree tony

Dave's in for some serious good times once he gets this on the water (after some paint/graphics). I firmly believe that the FE Jersey Skiffs are the best-kept secret in FE for pure fun on the water

[ATTACH=CONFIG]113945[/ATTACH][ATTACH=CONFIG]113946[/ATTACH][ATTACH=CONFIG]113947[/ATTACH]

[mitchesx]

I ran my FE30 set up by Tony today for the first time. All I can say is WOW!! It ran great, came in dry, I could not be happier. If anyone is thinking about a new boat and on the fence as to whether or not to ask Properchopper to set it up, I recommend him highly! I am glad I went to him for the FE30, Mean Machine, and my skiff. Thanks Tony!

[Fluid]

Several of my club members had Tony build their FE-30s and they were great boats! Tony is my friend but honestly, he does great builds and I have shamelessly stolen several build ideas from him....


.