I am some what happy ,I was able to give it more throttle.I would still like to try a stock prop....What do you recommend?
-
-
M445
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
X642 worked best on mine.
Here's a couple videos of mine
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Yeah a 642 is nice. I currently run 2200kv on 5s with642 detounged and a different cat than he has, but it does work nicelyOriginally posted by kfxguy View Post
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
I need help with my geico 29!!!!!!!!! Please
Rude
I think mainly its getting strut adjustment rite.
Sounds like the prop is still digging in a bit. Up higher with it
On my cat I run a much smaller 642 prop, and the clearance between the bottom of the strut, and the table top the boat is sitting on is almost 1/4 inch. You would think the prop wouldn't do anything but oh man does it
I get 60mph and no slowing down in the corners. Full on. Took me like 4 years to get it rite.... Lol
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
Thanks for the video's....... awesome.......I am going to follow your guys advise. I will send new videos...are any of you guys in Jersey?Comment
-
I agree with the "too much prop bite". At a couple of points there I could see the nose lift under acceleration. The strut should be flat with the table(parallel) as well. May need a tweak positive or negative. It can take awhile to get 'just right' as stated above.Comment
-
can someone post up pic of COG in the GEICO or BLACKJACK29? there is about another 3/16 more before prop hits the top of tail mount. I need to see battery placement in the hull.Comment
-
i raised my prop 3/16 up, in last video. video 1 and 2 strut is about level with table. can yall send pics please.Comment
-
Here ya go:
That was to be my next question "where are your batteries located?" And are you running 2 2s packs or 4 4s packs?Comment
-
I line up my batteries up with the engine mount, I don't go passed it. I run 6s batteries.Comment
-
h yeah, that is right. My bad... How many Mah are on tap then?Originally posted by rude5150 View PostComment
-
-
Why won't you go past the mount with your batteries? I think you need to slide them forward some.Comment
-
when I did that with GEICO it seen to bounce, so I went lined up with mount. the more back the quicker it seems, but its easier to flip like that. ill try that with BLACKJACK. I was surprised to see your lipo location, but that's at 4s. the 6s set up is heavier, that's why I figured my location to be from motor mount go back. how does the alignment of strut and tail look?Comment
Comment