Diegoboy's Stretch Renegade rigger

[sailr]

Pleased to be of assistance!

Thanks sailr. This will help several of us!

[Meniscus]

Thanks sailr. This will help several of us!

[sailr]

OK, by request, here are the dimensions and some photos of my Climate Matrix Rigger.
Sorry the pics aren't better. My old Fuji digital is about wore out!

[sailr]

Thanks. Dang that stuff is pricey! haha.

Here's the site I was going to get some CF from. Then I came up with the "immitation" idea

[Diegoboy]

Cool! I was just gonna ask where you get your carbon fiber plate. Every time I look at it the price is so high I slink back into the shadows!

Here's the site I was going to get some CF from. Then I came up with the "immitation" idea

[HOTWATER]

Hey Danny!

Very cool stretcher you're building!! The length is great...should be a good runner! Is the turn fin support going to be stretched back too? If so, you may want to think about adding a turnbuckle type support that mounts in between the hull and fin...

Great job! Keep the pics coming!!

-Kent

[6S HYDRO]

yes a ply , hatch lip would be sooo nice, that depron gets so beat up after a while

[sailr]

aha! I'll have to do some measurin'! I didn't build it. Picked it up from somebody else. It's a Climate Matrix. Gonna set it up for 4P. I'm setting up the H&M Xzess Evo II for Spec class with a UL-1 on 4S.

[Meniscus]

You mean the Starship rigger?

No, your other personal one
--------------------------------------------
Diego, the Michael's by me has some I think I have some 1/32 sitting around if you need it.

[Diegoboy]

Those that have renegade riggers will understand this next post.

I am still waiting for my LHS to stock up on 1/64 ply. I want to duplicate the top depron section skinned with ply before skinning the provided top ply. The reason is to eliminate the depron lip that the hatch sits on. By this added 1/64 ply skin, the lip that the hatch sits on will now have ply to support it. (so it won't fall apart).

[sailr]

You mean the Starship rigger?

LENGTH: 420mm
WIDTH: 280mm
WEIGHT: 357g without receiver and battery
MOTOR: water cooled, 20mm x 40mm, 2 pole, 3200KV 64g
ESC: water cooled, 3200 KV, 30a continuous, 40A (10 seconds), 6-12 NiMh, 2-3 Lipo, 2A-6V BEC, programmable, 27g
SERVO: Mini high performance
DRIVE SYSTEM: Flex shaft, 3mm prop shaft, drive dog
PROPELLER: Plastic 30mm x 36mm, 4 different diameters available.

[Meniscus]

Sailr, how about posting some dimensions of your rigger for Diego?

[sailr]

Cool! I was just gonna ask where you get your carbon fiber plate. Every time I look at it the price is so high I slink back into the shadows!

FYI, that is NOT carbon fiber used for the braces.
It's merely ply, with carbon decals and a flat black painted edge. (flat was the only black I had on hand)

[bigpapa]

looks good so far danny.........

[Diegoboy]

I think you'd be better served to get Dirty to answer his phone. He'd know more than any of us could surmise.

I wish.

I'll measure it when I get home.