30" Scratch Built Cat

[kennyrach]

hi kennyrach, thanks again for the laser cut guy, i got a reply and the price isl for the 40$ just awaiting on the payment info from him. soon i will be posting some pics.thanks again all the guys for the help.

Thank for relay i am glad if work out for you .
.This guy did 3 boat for me .So send some picture of the cut when you get it

[rawsonreyes]

hi kennyrach, when i get the cut outs i'll let you know. soon as i get it i will start the build and post it.thanks again rreyes

[kennyrach]

HI Rayson sound like a plan here some picture of my boat i am building

[ATTACH]14318[/ATTACH]

[ATTACH]14319[/ATTACH]

[ATTACH]14320[/ATTACH]

[ATTACH]14321[/ATTACH]

[rawsonreyes]

Cut outs being shpipped

hi kennyrach mr guzman is sending the kit next week hope to get then before i leave for work next thursday. soon the builds will start.

[kennyrach]

Rawsoneyes Your be happy with it m8

[rawsonreyes]

cutouts to be at home soon

hi kennyrach i will be getting the kits about friday but will be starting the build next two weeks when i return from work.i will post some pics when i return.thanks again rreyes that's how i feel.

[rawsonreyes]

hi lomdel ,normam got kits today will be posting when i return home thanks guys.hope shockerman got the frp hulls ready. i am doing a single/twin until next 2wks.rreyes.thanks again kenny.

[Norman2]

Hi Rawson, Glad to hear you got your frames and are ready for a build. Just some advice, make
sure you make this boat as strong as you can with braces in the frame. make sure before you
start sheeting to use a lot of fiberglass resin. Also once you have sheeted also use Fiberglass
resin to seal her. You will have an excellent boat. I am super happy with mine which is UL-1
powered. It rides super, handles excellent and hits 45.8 MPH on GPS. That is all I wanted.
Please let me know if you need any help. Regards
Norman

[lomdel]

Good luck with the build, Rawson!

Here is a couple of update pics on my build. After a LOT of resin, filler and a LOT of sanding and several layers of spray-on primer and several layers of white final coat, this is where she is at. It is not perfect, but the blemishes will be covered by some decals (). The blue of the King of Shaves colour scheme is next (if I can find the right shade of blue that is) and then a few clear coats to finish it of. I am still waiting for my SV27 cockpit to use on the deck-lid (ala Norman) and then that needs to be finished. I already have the KoS decals (a bit big but not too much).

Once the hull build is finished (hopefully soon) the cat will rest, 'till I have enough money to spend on the electrics...

[Norman2]

Hi Lomodel, She is looking fine. Mine also had some blemishes which I covered with graphics.
It will look good when you clear coat it. Regards
Norman

[jesflorida]

I am hooked. Can you sell a cut set of frame and skin wood? If so, what price?

Thanks,

jesflorida

[kennyrach]

Hi Rawson .here the Ebay item #310142265502 for the

EPOXY RESIN MARINE GRADE BOAT REPAIR FIBER GLASSING that i use all time ,you get 32oz for $33.00 .so how the kit so far .and sand all wood with 80 grit paper before building it save lot of time and bond better .Me i use 5min Epoxy on the boat and then seal all jointed with the MARINE GRADE EPOXY RESIN.so i will post some picture of my 1/4 scale Zipp cracker box than i am building now .

[kennyrach]

Hi jesflorida You can have this boat laser cut by Mr Guzman at

http://a-mmodels.com/

just tell him Bob from Kennyrach send you It cost about $40.00 and up or you and you can get all the wood from here at National Balsa Co

http://www.nationalbalsa.com/balsa.htm

[Jeff Wohlt]

Here are the 3/16" struts. Two bearings in the strut. Nose built to your size...wire, cable or whatever. The nice thing is they fit pretty much any hydro or cat. They also come with brackets.

I love bearings in struts and for wire drives they are excellent.

Nose removed and bearing comes out to replace...simple but effective. This one has not had a polishing.

[bigpapa]

hell looks what i need for my intruder jeff check my sv in this section