Can't start new thread, I'll figure it out
-
-
Dave @ HRC builds mounts for the 1717 Castle http://hrc-mfg.com/ Dave is a awsome guy and a member of our club and a forum member. You'll probably have to PM or Email him.Originally posted by jbracehabits View PostComment
-
Oh yeah there you go. I couldn't remember who else but yeah. This guy.Originally posted by flraptor07 View Post
The 1717 would be the perfect affordable yet reliable overpower of this hull. I would opt for it over the 1527
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
For sure, deffinetly more power than it needs. I'm gonna set mine up for P Mono, have to take about 3/4" off the nose and I think I'm going to use a TP 4060 1870kv or 4070 1770kv I have bothOriginally posted by Luck as a Constant View PostComment
-
Think I'm gonna follow the advice and go withy the 1521. What setup tho? 1.5d 1800 kv? Or? Sorry really noob with the boat setups, 8 or 5 mm?Comment
-
The 1521 is a good choice for this boat if you're going to run on 4s then I'd go with the 1.5d and you might as well get the 8mm shaft. It'll be just about bullet proof that way.Originally posted by jbracehabits View PostComment
-
The 1.5 d would be a good choice and a 448 maybe 450 prop on 4s.
The 1800kv also leaves room to go up to 5s if you want and move to a 445 or 447 prop
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
Awesome thanks you guys, and I did finally get a thread started also uploaded a picture. Look forward to sharing the progression with you guys.Comment
-
FWhen you did two layers of 3k, do you let first layer dry or can you do the second right after the first? I did read Bradley's tutorial but not sure about the process of two layers. Thanks again! 👍Originally posted by Luck as a Constant View Post
Guys, if you aren't using west systems 105, I highly recommend it. I've used zpoxy for years and never has it been this easy and good looking....
Sent from my iPhone using TapatalkComment
-
Both at the same time. No dry time
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
Awesome that's what I wanted to here lol. Here goes nothing, pretty nervous, first timer. Thanks again you've been especially helpful.Comment
-
It's easy bro. You'll do fine
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
Comment