-
LMT
LehnerMotorenTechnik.com -
Awesome looking Nate...
I just bought the same hull and Tiqueman is doing the cf inlay this week. I'm putting TP 3064 1610kv motors with T180 ESCs. How are you fitting 40mm cans in that hull? Going to run it on 4s first and then 6s eventually. Hoping for a 70mph boat also. I will be watching your build as this is my first twin build.....
. Good luck
Comment
-
Looks good....Tunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf DragboatComment
-
My camera doesnt do Justice, Ill get better pics tomorrow in the daylight, may bring out detail. And Im going to cut out carbon 3.30mm plates for the mounts. Not sure where ill mount just yet.Last edited by nate; 03-19-2014, 09:29 PM.LMT
LehnerMotorenTechnik.comComment
-
Yes but I was told if you go with 40mm cans you would have to mount them well forward(which I don't want to do). Or if you mount them in correct position for COG you end up with a nasty shaft angle! Hope you get them in because I have a pair of Castle 1515 I would love to fit in mine. How long before you start the mounting of motors? Thx JeffComment
-
Im cutting out the mount patterns tonight, should get some Idea's in the next hour. I'll post pics for in the morning. Im looking at other successful daytona builds, I may follow.LMT
LehnerMotorenTechnik.comComment
-
Nate, Ive been doing same thing. Looking at other builds, less questions in head, seems to be a popular hull we are working with. I got a bit of a shock last night when I did a speed calc on my setup "132 mph"
I sure the He$$ hope not !! I am no way ready for that "YET" . We have come really close to 80mph with our other SAW boats I was looking for 90mph or so with mine..You did good on your first CF inlay, my first was actually dangerous to put your hand thru hatch, you would get stabbed by CF strands, that stuff is sharp and dangerous....DJ
Tunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf DragboatComment
-
Thank you man. I'd be happy seeing mine reach 80mph. Thats moving! Im still trying to find a set of stinger's to go with. Yet to find any in stock.
Heres a few more pics of the inlay completely dry. It was a pain getting the cf to lay down around every curvature, and dry resin time set in 20min, so I had about a 10 minutes to get it situated before it started drying.
DSCN6415.jpg DSCN6416.jpg DSCN6417.jpg DSCN6419.jpgDSCN6420.jpgLMT
LehnerMotorenTechnik.comComment
-
-
Off to a good start. What stingers are you looking for?"There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
LMT
LehnerMotorenTechnik.comComment
-
Last I checked Kintec has them in stock. Where they mount needs a little work to get the stingers to neutral. Or FCR sells a shim for them."There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
How do you tell if there in-stock?LMT
LehnerMotorenTechnik.comComment
-
If the item has an "add to cart" button. You can email Jan to make sure.Originally posted by nate View Post
kintecracing@msn.com"There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
Email sent to him, if he has two in stock, Ill go ahead and get em. Until then, If its ok with you guys, Ill make this thread alittle pic heavy haha. Here's a comparison to the MM hull.
DSCN6429.jpg DSCN6430.jpg DSCN6431.jpg DSCN6432.jpgDSCN6433.jpgLMT
LehnerMotorenTechnik.comComment
Comment