"that" miss geico

[srislash]

The picture two above was a hint... Powered by castle!!!!! oh yes. Ill swap the.motor.out during the winter when.I.can't.drive.anyway. So will this motor get hot with the prop I.have now on.4s?

Sent from my SPH-D700 using Tapatalk 2

You mean with out cooling?

[masonis1]

Without water cooling. I have a get sink that adds some to keep it cool but not mug

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Just pick some and we'll go from there.What is you're e-mail and I'll send you the PDF so you can have a better look.They are on white but can be trimmed any way one see's fit.

Email is mmcgavock1096@yahoo.com

Sent from my SPH-D700 using Tapatalk 2

[srislash]

I sent you the file. You should get a cooling can for the 1515.You have time if you're going to do this over winter.

[masonis1]

i will look into a cooling can. ofe sell them?
also, i found this...http://www.hobbyking.com/hobbyking/s..._5mtr_402.html
402 is the checkered. would this work or do i want stickers

[srislash]

That should work.I see some have had peeling problems but if you do all you're decals before clear you should be OK.

[masonis1]

I did a very thin clear. Nothing hardly atball.
Will the 1515 get warm without the.cooling?

Sent from my SPH-D700 using Tapatalk 2

[srislash]

Depends how long you run it.You could keep checking it and bear in mind that the rotor inside gets hotter quicker and it takes a while for that heat to "soak" out to where you can feel it.If you run it then and check the temp then let it sit for 3-4 mins it will be hotter.

[masonis1]

Oh wow. I might test with.out.but I.will.getba can

Sent from my SPH-D700 using Tapatalk 2

[srislash]

Here is a link to what Alpha has http://forums.offshoreelectrics.com/...t=Alpha+spirit

[masonis1]

Alright. Thanks. I didn't see prices

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Looks great. Detongqued, balanced, sharpened, pitch.added on trailing edge, polished. Looks great. Im going to.charge the.batterys so.i.can test.before i leave for 3 weeks

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Might go test tomorrow.

Sent from my SPH-D700 using Tapatalk 2

[srislash]

So that is a grim prop?Can you tell where it was cupped?

[masonis1]

So that is a grim prop?Can you tell where it was cupped?

That is the grim prop. I dont understand what you mean cupped. I can tell where it starts to bend more where pitch was added on the.tips. The guy.did.a good job. Does it look alright for you?

Sent from my SPH-D700 using Tapatalk 2