*** NEW *** Pro Boat Veles 29 Catamaran

[REDLINE1]

Holy crap! nice work! How were your temps?

[ray schrauwen]

Yes, RTR with only the Veles/UL-19 Motor and a s&b 1716 prop by Dasboata. Here is a little better video that you can tell a little bit more about the run and set up.

WHat may I ask did Chris do to your prop? SB, thinning? It is the Stainless PB 17 16 or is it an ABC?

[dasboata]

WHat may I ask did Chris do to your prop? SB, thinning? It is the Stainless PB 17 16 or is it an ABC?

Hi Ray the 1716 does not come in SS,, the new ABC props are just that good,,,and my touches do help Marks got more in that boat his batteries slid forward!! !!!

[ray schrauwen]

Hi Ray the 1716 does not come in SS,, the new ABC props are just that good,,,and my touches do help Marks got more in that boat his batteries slid forward!! !!!

This is not same or close to ABC 1716? http://www.proboatmodels.com/Product...odID=PRB282047

[MADRCER]

This is not same or close to ABC 1716? http://www.proboatmodels.com/Product...odID=PRB282047

Yes, that prop is almost identical to an ABC 1716 -17-45. I have both and they are almost an exact match except the PB prop is SS and mine has been rubbed on by Chris...Below is a picture of one of my 1716's

ABC 1716.jpg.

[ray schrauwen]

Yes, that prop is almost identical to an ABC 1716 -17-45. I have both and they are almost an exact match except the PB prop is SS and mine has been rubbed on by Chris...Below is a picture of one of my 1716's

[ATTACH=CONFIG]153163[/ATTACH].

Well mine has been rubbed by me, nana nana boo boo! lol...

Stainless to me is a bit nicer because it holds an edge longer. Chris does very nice work, have a few of his in my box.

I'll be getting some from him eventually.

[MADRCER]

Lol! Like Chris said my batteries slid forward on me during this run causing the boat to run a little wet due to them almost being too small to strap in properly and I believe this boat still has more in it even with the Gens Ace batteries, once this issue has been corrected. Hopefully on the next run the Revo's will stay in place a little better due to their size matching the trays better and give me some more top speed.

[MADRCER]

"Miss Veles" Updated speed results (72mph).

[rayray9]

Nice run, do you prefer the Dynamite GPS or the Garmin?
I have the Dynamite - converted to US / MPH

[MADRCER]

Thanks! I have been waiting on that 72 mph run for a few days. The Dynamite has the fastest refresh rate of any I have tested and it has the logger feature. I had the Forerunner 101 in this run because the battery in my 301 was dead. The 301 is a little lighter and faster to respond than the 101. If you can get a 301 I would get that only because it displays in tenths but if not I prefer the Dynamite.

[rayray9]

Have you opened the software program for the Dynamite GPS?

[rayray9]

There is a setting for timing? What's the quickest rate?
I'm running Mac Book Pro, had to grab a Windows 10 to program this GPS

[vinnyp]

Mark,
Once again you have out done yourself. Great run.

[rayray9]

Thank you

[Zondar]

I haven't had any luck with software link included with my Dynamite GPS. I could use some advise.
On another note, are there any professional painters out there to revamp my CF Zonda 41"? THX