The official 36" zelos twin modding thread

[Keagan-Z06]

Yes it was a replacement from them.

[paulfromtulsa]

I would program and calibrate the esc just to be safe. It will only take a couple of minutes

[shua]

I would program and calibrate the esc just to be safe. It will only take a couple of minutes

Agreed.

[Keagan-Z06]

It doesn't need any programming card right? Just the usual instructions in the manual?

[shua]

It doesn't need any programming card right? Just the usual instructions in the manual?

No Program Card Required (but does make it easier)

Page 9 in the manual

[paulfromtulsa]

You can do the programming with the radio it's very easy

[Erroneous]

Raised the struts 1mm, slid the batteries back half an inch (still have an inch more) moved the garmin away from ESCs and hit 84.2 today!! I think for what ever reason the ESCs where causing interference. Boat is still not airing all the way out. Will YouTube the vid soon. image.jpg

[Keagan-Z06]

Daaaaamn!!!! Post vid quick! What else do you have done to the boat?

[arrover]

Wow. Those Poseidon motors seem to be working for ya.....

[Erroneous]

Motors are good so far.. Ran 4 mins on first packs and 7 min on second set.. Motors where barely warm to the touch. Only thing I dont like about them is the water jacket is permanent and had to swap the inlets out for 90* inlets to make them work.

[Erroneous]

Any problems and Ill go NEU.

[paulfromtulsa]

Motors are good so far.. Ran 4 mins on first packs and 7 min on second set.. Motors where barely warm to the touch. Only thing I dont like about them is the water jacket is permanent and had to swap the inlets out for 90* inlets to make them work.

Very impressive! Where did you get the 90 degree inlets? Got a pic of it?

[Erroneous]

Very impressive! Where did you get the 90 degree inlets? Got a pic of it?

Pulled the inlets off my old leopard jackets.

[ChevyPrerunner]

Nice speed!!


Sent from my iPhone using Tapatalk

[Keagan-Z06]

Motors are good so far.. Ran 4 mins on first packs and 7 min on second set.. Motors where barely warm to the touch. Only thing I dont like about them is the water jacket is permanent and had to swap the inlets out for 90* inlets to make them work.

Could you post pics of your setup?