Best Lipos for the buck ??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kfxguy
    Fast Electric Addict!
    • Oct 2013
    • 8750

    #196
    Figured I'd throw in my .02. Haven't been using lipos very long (about 6 month) but I've been running venom lipos. I'd like to share my experience with them. I've have one go completely bad, but that was my sons fault for using no lipo cutoff. Another I busted open in a wreck so that one can't be counted....but it never caught fire or anything. I had a 3s pack lose a cell. I repaired it tho. Bad connection. I've noticed there is two different ways their batteries are constructed. One way is a crimp at the cells and the other is soldered. Good luck trying to fix the crimped one. Hard as hell to solder flimsy aluminum. Another one I lost in a crash. Can't believe it was a hard pack and split open as easily as it did. And one of the cells was punctured in the process. I did get two of the batts that went bad replaced for free without sending the old ones in. Took a while to get replacements tho.
    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

    Comment

    • Accessable
      Member
      • Jun 2012
      • 57

      #197
      Another G8 Thunder Power bites the dust...
      TP Blow up.jpg

      TP Blow up2.jpg
      Here's the strange part - The second pack I use in my 12S setup is one of the originals I bought about 12 months ago.
      It still works and recharges/balances fine.
      It must have been a "good" one. Probably not made on a Friday.
      That's one out of six!
      The only consistency I have found is that none are consistent.
      Changing brands now.

      @ TheShaunessy: Sorry, my bad. Had my software set to 2 Pole instead of 6 for the screeny in my first pic above.
      My local TP distributor coughed and spluttered until I mentioned that a good friend is one of his best heli customers.
      Cheers.
      How to make a small fortune.... Start with a large one and get into FE boats!

      Comment

      • flraptor07
        Fast Electric Addict!
        • Aug 2013
        • 2451

        #198
        This is another place I found a while back and these packs are killer, I didn't want to post anything about these till I had some time to run them a while. The guys name is Buzz and he's a really great guy to deal with, a U.S. company with U.S. made packs which is another plus to me his prices are decent too! http://motionunlimitedusa.com/index.php?route=battery

        Comment

        • Brushless55
          Creator
          • Oct 2008
          • 9479

          #199
          Originally posted by flraptor07 View Post
          This is another place I found a while back and these packs are killer, I didn't want to post anything about these till I had some time to run them a while. The guys name is Buzz and he's a really great guy to deal with, a U.S. company with U.S. made packs which is another plus to me his prices are decent too! http://motionunlimitedusa.com/index.php?route=battery
          Buzz is a great guy... his shop is only 20min from me and I'm his high amp tester
          but...... these packs are not made in the US..
          so far these are the best I've tested :)
          .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

          Comment

          • flraptor07
            Fast Electric Addict!
            • Aug 2013
            • 2451

            #200
            Originally posted by Brushless55 View Post
            Buzz is a great guy... his shop is only 20min from me and I'm his high amp tester
            but...... these packs are not made in the US..
            so far these are the best I've tested :)
            I stand corrected, I thought he told me one time that they are built here. Could it be that they are assembled here and the cells come from else where?

            Comment

            • Brushless55
              Creator
              • Oct 2008
              • 9479

              #201
              Originally posted by flraptor07 View Post
              I stand corrected, I thought he told me one time that they are built here. Could it be that they are assembled here and the cells come from else where?
              They are made in China and assembled there as well
              they do rock! I am having great results with them so far
              .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

              Comment

              • flraptor07
                Fast Electric Addict!
                • Aug 2013
                • 2451

                #202
                Originally posted by Brushless55 View Post
                They are made in China and assembled there as well
                they do rock! I am having great results with them so far
                http://www.coloradorchobbies.com/
                I've got 4 of the 5100 6s packs and 4 of the 5100 4s packs and I think they are just as good as the Hyperion packs I have. I'm going to time and GPS each to compare them to see just how close they are.

                Comment

                • Brushless55
                  Creator
                  • Oct 2008
                  • 9479

                  #203
                  Originally posted by flraptor07 View Post
                  I've got 4 of the 5100 6s packs and 4 of the 5100 4s packs and I think they are just as good as the Hyperion packs I have. I'm going to time and GPS each to compare them to see just how close they are.
                  Mine are better than my Hyperion packs!
                  .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                  Comment

                  • Mad Racer
                    Senior Member
                    • Nov 2013
                    • 140

                    #204
                    Gee I;m getting worried about my new Nano Tech batteries.

                    As a new comer in FE boats I have had to skimp on battery choice as getting 4 new race boats up to speed from scratch with all the necessary running gear in 3 months for this years racing season it's been tough on my wallet to say the least. My batteries are China Hobbyline and Nano techs . Lately more Nano techs as the Aussie $ has dropped alot so buying Nano techs at the H/K Aussie warehouse is turning out the cheapest way. BUT i'm having all sorts of problems in balancing them up. Never charhe at more then 1C too...My newest packs are'nt balanced from the factory. Their first run today i hope. Been running Nano techs in my cars for the past 5 yrs with no problems but boats are so much harder on them.

                    Spending $250 on 2 4s packs is the cheapest from over seas is going to really hurt. So annoying .

                    Comment

                    • flraptor07
                      Fast Electric Addict!
                      • Aug 2013
                      • 2451

                      #205
                      Originally posted by Mad Racer View Post
                      Gee I;m getting worried about my new Nano Tech batteries.

                      As a new comer in FE boats I have had to skimp on battery choice as getting 4 new race boats up to speed from scratch with all the necessary running gear in 3 months for this years racing season it's been tough on my wallet to say the least. My batteries are China Hobbyline and Nano techs . Lately more Nano techs as the Aussie $ has dropped alot so buying Nano techs at the H/K Aussie warehouse is turning out the cheapest way. BUT i'm having all sorts of problems in balancing them up. Never charhe at more then 1C too...My newest packs are'nt balanced from the factory. Their first run today i hope. Been running Nano techs in my cars for the past 5 yrs with no problems but boats are so much harder on them.

                      Spending $250 on 2 4s packs is the cheapest from over seas is going to really hurt. So annoying .
                      If you're talking about Turnigy Nano tech batteries, I found that it took about 4 or 5 cycles before they started balancing right and they also are performing better the more cycles I get on them so far.

                      Comment

                      • Brushless55
                        Creator
                        • Oct 2008
                        • 9479

                        #206
                        Originally posted by flraptor07 View Post
                        If you're talking about Turnigy Nano tech batteries, I found that it took about 4 or 5 cycles before they started balancing right and they also are performing better the more cycles I get on them so far.
                        that's great news
                        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                        Comment

                        • ron1950
                          Fast Electric Addict!
                          • Aug 2010
                          • 3024

                          #207
                          I really like giant power from mojoracing not the cheapest but seem to work well in my hydros http://www.mojoracingproducts.com/products.html
                          MY RETIREMENT PLAN?????.....POWERBALL
                          74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...

                          Comment

                          • Brushless55
                            Creator
                            • Oct 2008
                            • 9479

                            #208
                            Originally posted by ron1950 View Post
                            I really like giant power from mojoracing not the cheapest but seem to work well in my hydros http://www.mojoracingproducts.com/products.html

                            Nice guy with FREE shipping and his ebay prices are cheaper yet
                            These are the same packs as Dinogy that are made by LNE

                            ps. someone rated him out for having cheaper prices, so he had to up his on his site...
                            .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                            Comment

                            • Mad Racer
                              Senior Member
                              • Nov 2013
                              • 140

                              #209
                              Thank you for your advice.

                              My new Nano Techs performed well but gently used them for the first 2 runs .

                              Cheers
                              M/R

                              Comment

                              • flraptor07
                                Fast Electric Addict!
                                • Aug 2013
                                • 2451

                                #210
                                I also wanted to add that my experience with the Turnigy Nano Techs is with the 10s packs which are two 5s packs wrapped up together you charge them as two sepperate 5s packs I have a pair of 10s 4000mah 35-70c Nano Techs and a pair of 10s 5000mah 65-130c Nano Tech A-Spec packs
                                Last edited by flraptor07; 01-25-2014, 07:37 PM.

                                Comment

                                Working...