ML Boats RSX 310

[Moonie]

Hey James here you go.

Motor- Neu 1515 1.5d 2700kv 8mm conceits on it
Prop- modded ABC H6
Esc- Castle xlx I mod them let me know if you need one
Battery- thunder power 5,000 mah 55c to 70c
Skid fin- Virginia craftsman sport 20 fin cut smaller
Cable- 3/16 to 3/16 shaft

[RC boat addict]

Thank you moonie,
What are 8mm conceits
I have a spare 150 amp Flycolor esc they are waterproof and handle 1080 amp peaks,what amp is the xlx?
James

[Moonie]

Sorry I’m on my phone at work. 8mm connectors on the motor. Castle xlx current limit can be set to 400amps. The motor I mention is a hungry set up. Your not racing so a 150 esc could be the ticket for you.

[RC boat addict]

Moonie, that XLX sounds like a brute what?s the Finished weight and the cost.can it do 8 s
( just for future reference)
James

[ray schrauwen]

That's a good idea. How far along are you on yours now?

Actually I finally finished it last fall. I still haven't taken it for a spin. I have in it a Scorpion 36mm x 83mm motor, 2200Kv 1Y with a SF200 old style 2-6S Esc and 4S1P 6000Mah Hacker 100-200C lipo's they are very capable.

I was going to try a ABC 1817 on it unless you can steer me to a different prop??

TIA

[Moonie]

I’m not sure on the weight but it’s minimum. It comes out less weight than a stock xlx. 8s it the max cell count. Right now they are $290 shipped.

[Moonie]

Actually I finally finished it last fall. I still haven't taken it for a spin. I have in it a Scorpion 36mm x 83mm motor, 2200Kv 1Y with a SF200 old style 2-6S Esc and 4S1P 6000Mah Hacker 100-200C lipo's they are very capable.

I was going to try a ABC 1817 on it unless you can steer me to a different prop??

TIA

Hey Ray. When you going to take her out? Show us what you have done to yours. The setup you have should be fast. I wouldn’t be surprised if you could end up using more prop.
TIA[/QUOTE]