I'm ADDICTED!!!!! Another Cat build

[zanda]

im building up the same boat at the moment . twin brushless from the aqua craft super vee 27 L36\56 7.2-18v. almost ready to hit the water just not sure on what battery to run and prop. do i need to get a left and a right hand prop ?

[ozzie-crawl]

yes you need left and right hand props and flex cables, unless your running wire drives

[zanda]

what will happen if i dont do this ? i no its probley a stupid question

[ozzie-crawl]

counter rotating inward props will make it alot easier to setup and get running properly and you need left and right hand wound flex cables other wise they will unwind

[Simon.O.]

counter rotating inward props will make it alot easier to setup and get running properly and you need left and right hand wound flex cables other wise they will unwind

Or as Scott said before you can use wire drives and not worry about cables shrinking, / unwinding etc.
You can also swap a couple of motor wires and change from inward rotation to outward rotation in about 2 minutes.
Depending on hull setup and your choice of running style, saw, oval or fun you get to choose.

I do not have twin cat yet but have done a fair bit of research.
Scott will help you and I'll point you to some others who know the game too.

Enjoy.

[zanda]

well i have the stock flexy cable of the super vee 27 where can i get another thats oposite wined and same size ? any idea of a good octura props? thanks for ur help

[ozzie-crawl]

this is what you need http://www.offshoreelectrics.com/pro...oct-oc150R-24c
as far as props you can get octura left/right x442s, but you may want to try some cheaper carbon props first to get an idea

[Team FFRB]

What rudder and stingers were those?

Hi Lomdel,

Hopf gear.