MHZ 114 High End Build

[Pheyd]

Those are some mighty fine parts. Looks like another great build!

[nata2run]

The drives are made for the 114, but cost wise they are close to the MBP mini drives. But keep in mind these were made specific for the 114 and you don't have to modify or shorten them in any way. They seem like a cool design with small "fins" on the tip of the drives. If proper installed in line, I think they will perform very well.

[TheShaddix]

So you're using drives made for a 138? OR they have 114 drives but just don't list them? I would be really interested in these drives too! The mbp ones are a bit too costly.

[nata2run]

That's what I thought. Have you run these before? They are reasonable in my books as long as they hold up.

Never ran those, but I have good experiences with MGM in general and have seen some heavy abuse on the 25065 without failing. I'm positive they will hold up fine for this project and have good control over the LMT's

[nata2run]

Great part list! Where did you get the high speed mhz drives? They aren't listed on the site.

Thanks,
The 138 Hi-Speed's were listed some time ago, When I placed the order I asked Shirley at MHZ if I could get them for the 114 and she sent them :)

[nata2run]

I really enjoy following your builds...

Looking forward to this one...

Thanks for sharing...

Aloha

Thank you, keeps me on top on the build knowing I started a post LOL

[srislash]

Hey bud! They are the 250A up to 8s lipo

That's what I thought. Have you run these before? They are reasonable in my books as long as they hold up.

[TheShaddix]

Great part list! Where did you get the high speed mhz drives? They aren't listed on the site.

[Local Boy]

I really enjoy following your builds...

Looking forward to this one...

Thanks for sharing...

Aloha

[nata2run]

Hey bud! They are the 250A up to 8s lipo

[srislash]

Hey, hey ,hey. Right on my friend. Which MGM's are those ones Kent?

[nata2run]

Couple of images of the hardware...
IMG_1190.jpgIMG_1191.jpgIMG_1195.jpgIMG_1197.jpg

[nata2run]

Hello Folks,
Time to build another Hi-End boat, its been awhile but I'm getting stuck into it again. Sadly this boat is not for myself but a custom build for one of our fellow forum members

Hull: MHZ 114 Carbon/Kevlar
Motor's: LMT 2240/7 LK
ESC's: MGM X2 25035
Drives: MHZ Hi-Speed Drives
Rudder: MHZ Scale
Collets: MBP
Servo: Savox 1252
Props: Andy Brown x447

This should be a very capable setup, and I'm sure a fun project to put together.

...let the build begin