Aeromarine Team Believer with updated hatch build. Special

[rearwheelin]

Not bad.... hate to ask you this, but , I hope there is no bad smell?
I have burned several motors and even that can be unpleasant and stays there for a number of weeks. On my maiden for my H&M Intruder S, the two FighterCat out runners were on the verge of burning up just after 4 minutes plus run. The smell was horrible, lol... and the motors were even completely burned yet.
( I changed to Scorpion motors and they are truly great)

The smell isn't bad and I did not clean the boat that much. There is a hint of smell but nothing that compares to the other stuff I have burned up lol the esc is out on the patio lol

[rearwheelin]

The next esc will have a lexan plate painted orange and will use 3m double tape . No sense in making another aluminum esc plate if I'm not going to use it for a heat sink.

[tlandauer]

The smell isn't bad and I did not clean the boat that much. There is a hint of smell but nothing that compares to the other stuff I have burned up lol the esc is out on the patio lol

I call these things ( burned motors, exploded ESCs, etc.) war trophies!

[rearwheelin]

I call these things ( burned motors, exploded ESCs, etc.) war trophies!

2 hydra 120's , 2 HV240's, 2 1527's lol

[rearwheelin]

And now a V3 image.jpg

[rearwheelin]

I just can't see anything wrong with pic lolimage.jpg

[rearwheelin]

Added a couple 1000uf caps @ the 8mm plugs . I have a castle cap bank and they say within 3" of esc . So not sure if this will help but I'm sure it's better than nothing.image.jpg

[rearwheelin]

I'm thinking of putting these here what do guys think ?image.jpg

[rearwheelin]

Basically I went cap crazy !image.jpg

[rearwheelin]

This little bank goes at the end of the harness.image.jpg

[rearwheelin]

Putting a thermal switch on the esc caps and heat sink .image.jpg

[rearwheelin]

So I planned on running the smallest prop I have and do single pass heat checks lol x438 2b

[tlandauer]

Sounds like a good plan, good luck.
I admire all that soldering work, sending all my stuff your way.. lol...

[rearwheelin]

Sounds like a good plan, good luck.
I admire all that soldering work, sending all my stuff your way.. lol...

Anytime ! I'm only getting better lol
I plan on getting into the cap bank scene now lol

[tlandauer]

Anytime ! I'm only getting better lol
I plan on getting into the cap bank scene now lol