Originally posted by HYDROJERRY
View Post
-
Fed Ex would have done the shipping ground for $17.00 -
USPS did it for less than that
Chris, its shipped. PMing you detailsComment
-
Comment
-
Scott, you are the man! Payment sent for shipping too.
Thanks a million! The floatation even matches my paint scheme lol
Comment
-
LOL thats why I did it. I thought I rmember you decided on blue/ orange. I had like a pinkish-light red color.. and I thought.. nahhh.. So I ran up to Kmart real quick and grabbed the blue. Its the details that make the build lol.Comment
-
-
I do my best.
got the PP Chris. thank you. 
Comment
-
No, thank you!
Quick question. It looks like the rough velcro is on the trays so my batteries will need the soft velcro, is that correct? At least I can get my batteries ready lol.Comment
-
Oh, and you can probably see in the pics. I set all the lines up so you can just drop your 180 in and go. I labeled what goes where. Also cut the short piece that got from one side of the esc to the other. the "jumper" if you will. the line that goes fromt he motor to the esc will probably need cut as well as the motor to the esit.. which reminds me.. i forgot to put the motor clamp screw in. CRAP...
bee looking for a second package. I knew I was going to do that. I built teh motor mount in the garage and left the screw on the work bench. Ill get it out tomorrow.
Comment
-
Is it just an m3 screw? If so, I have a box of them, don't worry about it.Originally posted by tiqueman View PostOh, and you can probably see in the pics. I set all the lines up so you can just drop your 180 in and go. I labeled what goes where. Also cut the short piece that got from one side of the esc to the other. the "jumper" if you will. the line that goes fromt he motor to the esc will probably need cut as well as the motor to the esit.. which reminds me.. i forgot to put the motor clamp screw in. CRAP... bee looking for a second package. I knew I was going to do that. I built teh motor mount in the garage and left the screw on the work bench. Ill get it out tomorrow.Comment
-
I think so, but its got little lock washers and the motor screws and washers in it as well. its already packeged up. Ill send them. My fault... thats what happens when you rush...
I amost didnt put the rudder in the hull.... I set the lid on the box and went "oh 
, I almost forgot the rudder!"
Comment
-
lol thanks. I guess that stuff can just fit in a letter. Did you see my post about the velcro?Originally posted by tiqueman View PostI think so, but its got little lock washers and the motor screws and washers in it as well. its already packeged up. Ill send them. My fault... thats what happens when you rush... I amost didnt put the rudder in the hull.... I set the lid on the box and went "oh , I almost forgot the rudder!" Comment
-
I put it in a small bubble envelope. Ive had first hand experience w/ small parts in a regular envelope. the sorting machines at the PO will try and run it thru the slots and rip the envelope and Im told usually jam the machine. Sometimes they catch fallen out parts, ofthen they do not. Ask Piranha.. he knows all about it.
No Ill look for the velcro commentComment
-
Yes the rough (hard) is in the boat. Soft on batts and ESCComment
-
Comment