x642 is good if you want both speed and good runtime x442 is also great =) i think x645 at 6 cell will shorten runtime a bit.. because of high amp draw
chuds DF33 from OSE
Collapse
X
-
Allright, thanks for the fast reply! Ofcourse we can't expect hours of running on nearly 2000 Watts ;-)
Comment
-
Hay bud,s I,m back just got my ul,1 motor sold and gettin ready too place the order for the 4074 1400kv from ose,but I need to know if I can still use my motor mount from the 3656 and do I have to remove the rail,s,
Attached Files
Comment
-
That will depend on the water jacket. I would measure it and see if you will have space in-between the rails. I am sure that mount will have the same mounting hole spacing as the 4074, it look like the same mount I have for my 4082...24 R/C vehicles and still counting...What budget?
Comment
-
Rich in,between the rails 53mm ,totale for the hole 27mmOriginally posted by Rich View PostThat will depend on the water jacket. I would measure it and see if you will have space in-between the rails. I am sure that mount will have the same mounting hole spacing as the 4074, it look like the same mount I have for my 4082...
Comment
-
WOW RUMMY that hull is flyin,are ya sayin 4082 and 1400kv 0r1500 kv I only have 120 esc,and hay bud why don't thay make 4074 1400 in greenOriginally posted by Rumdog View PostDude! Get the 4082 for a few more bucks! It is more suited for this size hull and will spin up some bigger props. You'll want at least a 45mm prop to push this boat efficiently on 6s.
Comment
-
Originally posted by Rumdog View PostDude! Get the 4082 for a few more bucks! It is more suited for this size hull and will spin up some bigger props. You'll want at least a 45mm prop to push this boat efficiently on 6s.
From my experience, this is worth the few extra bucks!
24 R/C vehicles and still counting...What budget?
Comment
Comment