Looking for 2x Schulze 40.160 "Old Version" ESC's

[tagasagwan]

Hi Guys,

I'm trying to help out a non OSE member friend of mine Tony Simpson of Viperhulls from Brisbane, Australia. he's looking for a couple of the old version Schulze 40.160 ESC's and program card for a twin cat project for SAW.

Post here for your offers but final sale transaction will be between the seller and Tony Simpson. Thank you!


Stephen

[Fluid]

No program card for the old Schulzes. They use DIP switches to change parameters. Sorry, mine are staying with me.

[tagasagwan]

No program card for the old Schulzes. They use DIP switches to change parameters. Sorry, mine are staying with me.

Do you know somebody selling them? hehehe!

[Chrisg81983]

Keep wishing you will almost never see them. I been trying for years to find some. You might find a single one here and there but Its almost impossible to find a set. Plus Brian has them all hoarded away like bars of gold.

[tagasagwan]

You're right Chris. It's like shooting to the moon but, there's no harm in trying.

What can you suggest as a alternative for the Schulze? We are looking at the MGM Compro 63.250 but we know nothing about it's performance aside from the specs listed on their website. They cost a heck of money and we're not sure if it worth the gamble.

[Chrisg81983]

Mgm looks promising but I think the 250 might be a tad too small for saw. Friends of mine and myself are looking int them as well. The mgm 400 is just too big in physical size. I am waiting for a few new controllers to finish being tested and will let you know.

[Chrisg81983]

What are you planning to run these on first of all

[tagasagwan]

They are intended for a 52" viperhulls offshore cat in carbon fiber w/ LMT 3040/9 on 10s, x457.

More pictures can be found here:

http://www.viperhulls.com/

[hydroplane44]

post your request here, you can use also english!

http://www.rc-raceboats.de/forum/forumdisplay.php?12-Raceboatskram-...-Suchanfragen

good luck!

[oscarel]

I have an MGM 25063 I raced with for the first time this weekend, worked great! Here's data from a run, not sure which may have been practice on Friday. I'm using a Lehner 3060/10 on 10s2p 10,000mah total prop works west 6518 375 pitch in a 42" cat, used about 50% during 1 mile race.

Screen Shot 2013-05-19 at 7.23.13 PM.jpg

[tagasagwan]

post your request here, you can use also english!

http://www.rc-raceboats.de/forum/forumdisplay.php?12-Raceboatskram-...-Suchanfragen

good luck!

Thanks mate! I will do that. :)

[tagasagwan]

I have an MGM 25063 I raced with for the first time this weekend, worked great! Here's data from a run, not sure which may have been practice on Friday. I'm using a Lehner 3060/10 on 10s2p 10,000mah total prop works west 6518 375 pitch in a 42" cat, used about 50% during 1 mile race.

[ATTACH=CONFIG]99121[/ATTACH]

Thanks Oscar! I appreciate the info. This shows that the mgm might work after all. plus you're using bigger prop too. What speed did you get from it by the way?

[Chrisg81983]

I have an MGM 25063 I raced with for the first time this weekend, worked great! Here's data from a run, not sure which may have been practice on Friday. I'm using a Lehner 3060/10 on 10s2p 10,000mah total prop works west 6518 375 pitch in a 42" cat, used about 50% during 1 mile race.[ATTACH=CONFIG]99121[/ATTACH]

Hey buddy I am glad the mgm worked out for u. Question what was the max amps pulled and watts as well. I cant read the legen on your pictures. Maybe u can send me an email with more info on then all will be appreciated. My email is cgenovese83@gmail.com thanks cg

[oscarel]

Ill send you a few later tonight.

[Chrisg81983]

Great thanks