ML Boatworks RSX380 , The big brother to the RSX310, 38", 6s lipo- Q FE Rigger!

[cybercrxt]

Well, the 6s version design is now finished. It is the RSX380, 38" FE rigger. Shown in the plans here are a 40x82 motor with water cooler, and a 6s 5000mah pack, which you can see, fits fine. The tub is 4-1/4" wide, so there is plenty of room in this hull. Like the RSX240 design I just finished, I need to do the cowling plug and mold for this hull, but the wood kit, is done. More on this soon! Mike







-

[Peter A]

Hi Mike
Will you be able to supply these with turn fins also? Keen as mustard for one so put me down for one when they are ready.
Cheers
Peter.

[cybercrxt]

Peter, yes, that should not be an issue having fins for this, or the 24" version.

[romspacenut]

Dangit Mike,

I'm building the 171 and 172. Now I gotta get this too. Nice works buddy!

[cybercrxt]

The framing for the RSX240 and RSX380 cowling plugs arrived. So now, I will be starting on them. The 240 is easy as I can cut down the RSX310 cowling pictured, but the RSX380 will need a larger cowling, so I will have to make one up from scratch.






-

[Tomcandersen]

Any news on this one Mike?

[cybercrxt]

Just replied to you on IW. I am going to get to work on this cowling plug probably next week. Just gotta finish up some of these other plugs I had started first! Thanks, Mike

[cybercrxt]

Finally started on the RSX380 cowling plug last night. I will get it finished in a couple weeks. This will finish out the 240, 310, and 380 hulls, and eventually, I am going to do a gas rigger. Mike

[T.S.Davis]

The fin Kevin makes for the 38 is likely the same one I run on my Q sport. Awesome piece of engineering and craftsmanship.

[cybercrxt]

Yep, it will be Kevins 40 fin I offer with this. He definately does excellent work! Im impressed with the quality, and turn around time!

[T.S.Davis]

You can hang a lot of G's on that material too.

[Peter A]

Hi Mike
How are these coming along. Any idea when the kits will be ready?
Peter.

[cybercrxt]

Hey Peter, The kit itself is fully designed, and has been cut. I just need to finish up this plug. I have an order for one of these kits, so I need to get the cowling done. I am hoping shortly. Always so busy, but this is on the list! Mike

[cybercrxt]

I finally sat down and forced myself to find time for this. This is the RSX380 cowling plug, next to the RSX240 cowling. So far so good. I plan on having this finished by next week, and a mold made.





-

[cybercrxt]

Cowling plug is all but done. Just need to wet sand it, buff, and make the mold. Once that is done, this kit will be on sale on the website. Mike