King Of Shaves C1 Brushless!

[Brushless55]

Dragon Mini Cat 820

http://www.storacingproducts.com/dragon-mini-cat-twin-brushless.html

New! 880mm Twin Brushless Motor Ready To Race

Speeds up top 50mph+

Length - 820mm#
•Width - 240mm
•Weight - 2400g
•Speed Controller - 2x 40 Amp Water Cooled (Included)
•Radio - 2 channel (Included)
•Motor - 2x Water Cooled 2636kv brushless (Included)
•Battery - 2x 11.1v 2100 - 4500Mah Lipo (Not Included)
•Hull Material - Fibreglass (FRP). Propeller - D36 x P1.4

Im guessing this a copy of the KOS venom product

that looks awesome, I don't think it's a copy just a different version..
venom puts their name on alot of things and usually adds to the price

[Drag Boat Bob]

I found a quote over on RCU that I'm curious about:

"ORIGINAL: VENOMOUS

The EKOS handles rough water well. Its been tested in different lake water conditions and temperatures from below freezing to 90F normal summer days.
The photo of the props looking like 4 blader's is interesting. The EKOS comes with 3 blade props standard and a spare set are included.
We have tested the EKOS with 4S 3200mah Lipos and the 1.4X36mm props and running temps were fine. The speed was the same as the UL-1 for comparison."

Did he say 4S? Hmmmm...

[Jeff Wohlt]

Good running cat. 40 amp ESCs? wow....

Just give me a hull and I will take care of the rest :) Looks like that hull can handle 70 mph but a crash could show you how well it is made.

[RCprince]

That Minicat seems to be trimmed quite nicely.

[Drag Boat Bob]

Good running cat. 40 amp ESCs? wow....

Just give me a hull and I will take care of the rest :) Looks like that hull can handle 70 mph but a crash could show you how well it is made.

Actually the EKOS has 60 amp ESC's. Tower has a listing for the hull only (order pending) for $132.99 and they are accepting back orders.

http://www3.towerhobbies.com/cgi-bin...I=VNRB1810&P=Z

[Jeff Wohlt]

Just got 2 of them! One will be for running this evening and one is for sale.

I wills say, I have NEVER seen a factory boat this well done. Perfect set up. Rudder also has a hole for water but two lines coming up from brass in front of the rudder should work well. We already slid them down deeper.

Hull is so damn nice. Scale and all stickers and trimming has a very thick clearcoat...almost epoxy. Nothing will come off. Inside is very nice...all wood is epoxied. Out of a 10 I would give it a 10...no kidding!

Yes, 60 amp ESC. Nice motors with the built in cooling can. Nice radio...I think airtronics.

I will sell one for $495 shipped to your door in US only. You must PM me for paypal address. You will have by the weekend!

I have some pics but have to send from my phone.

[Eggy]

Sounds to good to be true Jeff, please take some shots or even better film todays ride, some shots/vids from the inside of the hull as well would be nice.

[Drag Boat Bob]

Just got 2 of them! One will be for running this evening and one is for sale.

I wills say, I have NEVER seen a factory boat this well done. Perfect set up. Rudder also has a hole for water but two lines coming up from brass in front of the rudder should work well. We already slid them down deeper.

Hull is so damn nice. Scale and all stickers and trimming has a very thick clearcoat...almost epoxy. Nothing will come off. Inside is very nice...all wood is epoxied. Out of a 10 I would give it a 10...no kidding!

Yes, 60 amp ESC. Nice motors with the built in cooling can. Nice radio...I think airtronics.

I will sell one for $495 shipped to your door in US only. You must PM me for paypal address. You will have by the weekend!

I have some pics but have to send from my phone.

WOW! From "just give me a hull" to getting 2 EKOS'. You must have connections...

Some lucky guy is going to be very happy, as Tower doesn't have any right now.

[Jeff Wohlt]

That is what I thought as well.....I was looking for blemishes...poor quality of something...not there.

I plan to go shoot some video this evening but girlfriend may have something else to say...oh well they are a dime a dozen...boats first!

Very impressive. Small three blade props but should scream. We will run it on 2S each side but I figure the 3S is the way to go but we do not have any 3S....hmmm...got 4S but not sure I should do that.

Box says 40 mph out of the box.

I just sent a phot from my phone to my e-mail but nothing yet.

Radio alread has a baloon on it. Servo mount is alum. Motors are straight with shafts and no slants....and room for some nice 540 Xls !

[Jeff Wohlt]

It is not me with connections. I just get the benefits :) Yes, they are really here.

[RCprince]

I know you already know this Jeff, but on RCU the guy who was also so kind to post a video and pics said he lost a shaft, So tighten everything.

[Brushless55]

I may have to get one from tower for $440 and try it on 4s!

[Jeff Wohlt]

Thanks for the warning. One of the guys is going thru it now. Not sure the flex cables are soldered eith but he is pulling them anyway.

just called him...one set screw was not very tight.

[Drag Boat Bob]

I may have to get one from tower for $440 and try it on 4s!

For 4S we'll need to start looking for some metal props. Unfortunately the selection isn't that big (need a right hand and left hand). I just do not believe those plastic ones will be able to stay together the first time the boat gets airborne and they go 45k+ rpm.

[Jeff Wohlt]

Might have to use some CF L&R to get started. These look pretty hard so I am gueesing they will flex some. Good looking little props.

Just grabbed my work Mino HD and will try to get some video.