Is it a good choice or TOO much power? Will it fit with no mods?
Castle 1717 Direct FIT?
Collapse
X
-
-
the CC1717 does fit, a little snug with the water jacket
almost the same kv as the CC1520 1600kv.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
-
The 1580kv car version has 5mm shaft
The 1500kv air version has 6mm shaft
Comment
-
Originally posted by wilsta67 View Postim fairly sure the shaft will need to be shortened and the collet will need to be drilled out to fit the 6mm shaft the stock motor has a 5mm shaft.
so not a direct fit.
YES, and I have two of the air motors and thinking I may try them in a twin somethingOriginally posted by Diesel6401 View PostThe 1580kv car version has 5mm shaft
The 1500kv air version has 6mm shaft
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Here's something I have been working on. I wanted to use the car verison with a waterjacket on my vanquish hull but quickly found out jackets are very hard to find right now, so I decided to air cool a 1717 car verison.Originally posted by Brushless55 View PostYES, and I have two of the air motors and thinking I may try them in a twin something
I removed the rear endbell and drilled cooling holes into the endbell, i replaced the stock CC endbell screws with leopard ones (i like them better, easier to install and remove) I then drilled holes in the front cap of the motor. I made a gasket around the endbell and installed a 12v brushless 40x40x20 computer fan that runs off of a 3s 2200 3c lipo. I attached the fan to the motor and the fan will draw heat away from the motor. I then modded the stock motor mount and allowed a gap between the motor and the motor mount to allow air to be allowed to be pulled threw the motor. I will be using a sr3300t rx with telemetry so I can get live motor temps on my dx3s radio. Haven't tried it yet but hell it's worth a try. If it doesn't work I slap a different motor into it and consider it a $70 learning lesson. So with that being said, a twin 1717 air cooled would be sick! JMO
Here's the thread on everything more in detail: http://www.rcgroups.com/forums/showt...1405388&page=7
Comment
-
Final pic:Attached Files
Comment
-
Very cool idea D!Originally posted by Diesel6401 View PostHere's something I have been working on. I wanted to use the car verison with a waterjacket on my vanquish hull but quickly found out jackets are very hard to find right now, so I decided to air cool a 1717 car verison.
I removed the rear endbell and drilled cooling holes into the endbell, i replaced the stock CC endbell screws with leopard ones (i like them better, easier to install and remove) I then drilled holes in the front cap of the motor. I made a gasket around the endbell and installed a 12v brushless 40x40x20 computer fan that runs off of a 3s 2200 3c lipo. I attached the fan to the motor and the fan will draw heat away from the motor. I then modded the stock motor mount and allowed a gap between the motor and the motor mount to allow air to be allowed to be pulled threw the motor. I will be using a sr3300t rx with telemetry so I can get live motor temps on my dx3s radio. Haven't tried it yet but hell it's worth a try. If it doesn't work I slap a different motor into it and consider it a $70 learning lesson. So with that being said, a twin 1717 air cooled would be sick! JMO
Here's the thread on everything more in detail: http://www.rcgroups.com/forums/showt...1405388&page=7
I'm thinking of trying water injection on a outboard setup
let the can fill with a constant flow of cool water.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
-
-
Load up on the 1580kv car version here.............Originally posted by wilsta67 View Posthe never said which one he was asking about i assumed it was the aircraft as you cant buy the car one anymore, and they have the aircraft motors on sale.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=
Comment
Comment