ProBoat's new 29" Mystic Brushless catamaran

[Doby]

So now we will have two pretty well identically sized and powered boats on the market right out of the box. MC and this one.....excellent for an apples to apples comparison.

LSO is getting better and better. Well done AQ and PB.

[tiqueman]

So now we will have two pretty well identically sized and powered boats on the market right out of the box. MC and this one.....excellent for an apples to apples comparison.

LSO is getting better and better. Well done AQ and PB.

Very well done to both PB and AC.

[Rumdog]

Yay! Great looking boat. PB and AQ are goin at it huh? I havent had a rtr in some time, but there are a couple looking pretty sweet right now!

[Darin Jordan]

The sample I sent to Ken to race at the Nats is pretty much how it comes, with the exception of the Octura coupler I installed, and the upgraded contacts on the motor and ESC. I also did some blue-printing on the sponsons and put 2-Part foam up in the nose. Stuff anyone could do, which will make it more trouble-free during the course of a race weekend.

I've never had this sample in the water, so Ken is going to have to dial it in a bit. Hopefully I have it close off the bench and he settles in on a prop quickly. Should be pretty simple to figure out.

I'm very happy that PB and AQ are able to supply the community with some quality RTRs that actually have a legit place to go race now! Should be good for participation in this fun and exciting hobby of ours!

[Diesel6401]

Never say that D! It always ends in a broken promise. Always.

When I call looking for a place to "stay/vacation" for a few days/weeks/months/years..... You will know how well she got over it...



Looks like I need to make some room on the shelf for this bad boy...

[LiPo Power]

Damn, I just got my MG.....
Well, time for garage sale on some of the staff to get mula for new boat....

[tiqueman]

I'm very happy that PB and AQ are able to supply the community with some quality RTRs that actually have a legit place to go race now! Should be good for participation in this fun and exciting hobby of ours!

Well said. I cringe telling people, "oh yeah, the boats $xxx.xx, but you need to do this and this and this and this if you want it to be competitive and race worthy. Darin and Grim are doing a great job of handling and resolving the "this and this" things.

Those who know me and those who run w/ me know how much I love my PBMG. Started out shaky, but now we're in a serious relationship. This new one seems like its going to be love at first run.

Darin, has the bushing issue that some have come accross been addressed?

[GP73]

Uh?

It's the same boat and you already have the offset rudder and the reinforced hatch...

Or you don't like yellow?

Damn, I just got my MG.....
Well, time for garage sale on some of the staff to get mula for new boat....

[Darin Jordan]

Darin, has the bushing issue that some have come accross been addressed?

Good Question... I had forgotten about that. The new hardware was spec'd to have lead-teflon bushings, instead of the brass-ish bushing that is in the MG. That's what appeared to have been the case in the sample I sent to Ken. I did look at it when put the shaft back in after doing the blueprinting on the bottom. I'll confirm when I get the Production sample.

[tiqueman]

Brass-ish Awesome Thanks!

[HYDROJERRY]

''O God'' its killing me heres anew one and i just cant get my MG fast enough everywere you look cats cats,,O shipping please hurry!!!!

[dana]

you see what happens when you get involved and listen to what the boats guys are saying about it.... you get the next version with the necessary upgrades done and proven. nice work proboat

[ron1950]

darin we may not always see eye to eye but great minds think alike here.....my mg has the 1800 from the stiletto and a 120a esc....is that the same motor in the mystic>? ill get to see kens next week

[nosreme722]

Just bought a brand new MG.. just missed it.. just barely. Still a great boat though

[tiqueman]

Aww its Rons softer side beautiful... Id imagine its the same motor and esc as the Stilletto. Ron, what prop are you spinning on yours? 642?

Incase anyone is interested, this may help answer some questions or wonder about the 1800 motor. This is my latest Geico that I recently picked up like new but it came w/ the 1800PB motor. I ran it on a detongued and slight tip cup 642, 4S2P turnigy packs 4000mah, 30C. My original Geico set up was the factory 1500 motor, a 120A speedy and a M445 slightly modded. It showed a consistant 42 to 43 mph on a garmin forerunner 101 gps. Running against the MM thats shown in this vid, we came to the conclusion that although complete different set ups, props etc, the boats were within .1 or 2 mph of eachother. Running the new (used) boat this past weekend, the MM and the Geico are still almost the same speed. So I recon you will be in the low 40s w/ the ease of a simple prop swap. However, in a 4 min LSO heat, it ran quite a bit warmer than Id like. Also, this was its first run of me owning it, so theres a bit of bounce and the wa-wa, come 2nd run which was not recorded, I got almost all of it out. And mind you for those that are still stuck on a offset rudder fixing the wa-wa. Heres proof its all in the strut and cog. This one HAS the offset.....

http://www.youtube.com/watch?v=SC_RbB_5exc