Your MG that started off as a hull

[tagasagwan]

Hey guys! I just saw this one! hehehe!

http://forums.offshoreelectrics.com/...full-throttle!

[tagasagwan]

I think you guys should stick around for a while. Macdon will post something in an hour or two! Maybe sooner! hehehe!

[macdon]

Belated Happy Easter everyone!

Due to the observance of Holy Week there was no work most of last week, so I got to hangout a bit over at Jim's Dock! hehehe
Gotta keep up with the gas boat crowd, you know!

Whats this I hear about wanting some hulls? There seems to be tons of hulls out there that its getting harder to choose which one, right?
Well then, lets add to that difficulty! hahahaha!

40" cig boat molds done!

Prototype/plug was released from its molds earlier this morning - so its now ready for the first product pull! Unfortunately, my budget for the first one was eaten by the dark side of our hobby - the gas boat! I will need a bit of time for my own 40" cig boat - but just letting you guys know that it is done and ready to rock!
You guys never doubted me for a second, right?

The 37" Cat would be next on the molding block!

In the mean time, do check out the pics of the molds!

[tagasagwan]

Belated Happy Easter everyone!

Due to the observance of Holy Week there was no work most of last week, so I got to hangout a bit over at Jim's Dock! hehehe
Gotta keep up with the gas boat crowd, you know!

Whats this I hear about wanting some hulls? There seems to be tons of hulls out there that its getting harder to choose which one, right?
Well then, lets add to that difficulty! hahahaha!

40" cig boat molds done!

Prototype/plug was released from its molds earlier this morning - so its now ready for the first product pull! Unfortunately, my budget for the first one was eaten by the dark side of our hobby - the gas boat! I will need a bit of time for my own 40" cig boat - but just letting you guys know that it is done and ready to rock!
You guys never doubted me for a second, right?

The 37" Cat would be next on the molding block!

In the mean time, do check out the pics of the molds!

Nice work! So, is your T-600 will go with this hull?

[lenny]

I thought you had gone fishing for a while in the koi pond.
Looking very good,
And can not wait to see the first pull.

[srislash]

I was thinking a T-600 for this hull as I would just cruise and wave hop it. Got me thinking colours here...

[macdon]

Nice work! So, is your T-600 will go with this hull?

It would be a toss up between the t-600 1400kv outrunner and/or the Leo 4082 1600kv inrunner - both in 6s (2 x 3s 5200mah).
While Im sure a 56 size could do more, I wanted to use the T180a I got 'coz the 240ahv is still a bit pricey for me at the moment.

[srislash]

Happy Easter to you as well Mardon.The hull looks good.

[macdon]

I thought you had gone fishing for a while in the koi pond.
Looking very good,
And can not wait to see the first pull.

Hahahaha! While my worker was releasing the molds earlier, I was cleaning the filter of the koi pond as it is turning to black water! hahahaha
Darn Lenny - you just dont know how anxious I am for that first pull! Its like you're already nearing the end of the tunnel then your car stalled - bummer man!
Hey Lenny - you gonna lend me some money or what?? hahahahaha!

[macdon]

I was thinking a T-600 for this hull as I would just cruise and wave hop it. Got me thinking colours here...

Oh yeah buddy - that cruising and hopping is what Im looking forward to. Ohhhh, and you have to mention colors - darn, Im splitting my hair!!!!! Another stumbling block that we have to overcome, I guess.
But I dont see you ever having that problem - seeing that masterpiece you did on Jason's MG is mouth watering to say the least!

Yo Jason - stop drooling over your keyboard staring at those pics that shawn posted!! hahahaha! Just stick to your immaculately painted MG and forget about all your gas boats! Just send them all to me! hahahahaha!

[macdon]

Jason's newly painted MG looks sooooo good that I wanted it to be my avatar............even if its not my own boat! hahahahaha!

Thats just sick shawn! You are da man!

[srislash]

Thanks Mardon.It is yet another to be proud of.

[jasoncyclone]

Jason's newly painted MG looks sooooo good that I wanted it to be my avatar............even if its not my own boat! hahahahaha!

Thats just sick shawn! You are da man!

GREAT IDEA!!!! Thanks

[macdon]

Stephen is insisting that I should offer up those MG turbine canopies in the unique products & services section - but I'd thought I'd ask for your opinions first.

[jasoncyclone]

I think that they would sell very well! You should do it..... Although I do like the idea that there are only a few out there... HEHEHE