One spike with that 2600 on that SV esc and kaboom...and there might be some collateral damages to like your lipo's I should know trust me
-
Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!" -
No Lipo's here. Just NIMH for now. So it's a 50/50% answer huh. Ok. Avanti27 says it's ok, RCprince says no. Hmmm.....Comment
-
I run nimhsThe Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.
Comment
-
Uhuh, so I'm wondering what the issue RCprince had then?Comment
-
we killed one lipo and blew the esc, we were running a grimracer 45x68 along with the ammo 2600 and 2 2s 3300Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"Comment
-
So would the GrimRacer L44x66 prop have been a better option to get away with and not blow anything?Comment
-
Those props are too big...right now I'm running a Fiegao 9l( 2731 kv) X637 with 5s on an EP1 and out running any SV you can bring my waySamuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"Comment
-
Ok, on 4s you would be over 40,000 rpm. The Ep1 and the feigao arent even close to being efficient enough to run that for more than a couple passes without melting something. 5s is as feasible as the bridge im gonna sell you.Originally posted by RCprince View Post
Last edited by Steakhouse; 01-22-2008, 10:24 PM.Comment
-
the prop was your problem not the 2600The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.Comment
-
We drag race...no time for circles the earths already spinning, Steakhouse bring your SV we'll be in Valdosta (Thur 17 April - Sun 20 April) for the SV open class...who laugh last laugh the best ;-) mums the word.Originally posted by Steakhouse View PostOk, on 4s you would be over 40,000 rpm. The Ep1 and the feigao arent even close to being efficient enough to run that for more than a couple passes without melting something. 5s is as feasible as the bridge im gonna sell you.Last edited by RCprince; 01-23-2008, 12:44 AM.Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"Comment
-
Avanti I knew the Prop was the Problem I kept telling him to prop down...then kaboom green smoke of deathSamuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"Comment
-
You will easily be pulling 60 plus amps. That's way to close to the maximum rating. I would run a minimum of 100amps or greater.Originally posted by SweetAccord View PostSteven Vaccaro
Where Racing on a Budget is a Reality!Comment
-
Using a Y537/3 prop can lower your load by 10 amps with close to the same speed over the X637 prop. Just another option. I noticed Steven has started selling it.Last edited by ReddyWatts; 01-23-2008, 07:34 AM.ReddyWatts fleet photo
M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3Comment
-
That does sound like fun.Originally posted by RCprince View Post
Any motor in the Supervee? I ve heard that they blow over if you try to push them hard. Cool
Last edited by Steakhouse; 01-23-2008, 09:13 AM.Comment
-
Just gotta take the time to balance her out....Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"Comment
Comment