Got my revolt

[MAMBA2200]

Ok will do running it today will let u know

Sent from my DROID RAZR using Tapatalk 2

[MAMBA2200]

Heading to the water for maiden run will post video in the morning

Sent from my DROID RAZR using Tapatalk 2

[MAMBA2200]

Have a question on the first run the batt wires got really hot and melted where the wire plugs into the batt i am running 5200mah 65c stock prop had a max amp of 84.4 amps do i need to put bigger wire on them its same size as esc no binding in cable ran great just batt wire problem is only problem please give me opinions thanks

Sent from my DROID RAZR using Tapatalk 2

[Grimracer]

Hardpacks?

If so the 4mm bullets leading to the pack are just not going to cut it.

Grim

[MAMBA2200]

Ok then just use a solder connected packs ? what if i soldered them

Sent from my DROID RAZR using Tapatalk 2

[hobby_man]

Have a question on the first run the batt wires got really hot and melted where the wire plugs into the batt i am running 5200mah 65c stock prop had a max amp of 84.4 amps do i need to put bigger wire on them its same size as esc no binding in cable ran great just batt wire problem is only problem please give me opinions thanks

Sent from my DROID RAZR using Tapatalk 2

I ran the boat stock, the stock speed control is rated for 50 amp continious, after buring out the motor/speed control in mine 3X they gave my my money back

[bruceisla]

Have a question on the first run the batt wires got really hot and melted where the wire plugs into the batt i am running 5200mah 65c stock prop had a max amp of 84.4 amps do i need to put bigger wire on them its same size as esc no binding in cable ran great just batt wire problem is only problem please give me opinions thanks

When you get a chance, post some pics of the melt-down so we can see exactly where the heat was excessive.

[traeside]

also how long are your wires? keep them as short as you can and put some 5.5MM conectors on there.

[MAMBA2200]

When you get a chance, post some pics of the melt-down so we can see exactly where the heat was excessive.

the heat was right where the wire went into the battery

[bruceisla]

So .... right here at the tip of the arrow .... correct ??

[MAMBA2200]

yes but the batts are the kind with the 4mm connector prob just too much amp draw on those connectors

[MAMBA2200]

figured i would sharpen and polish it up hope you like photobucket-17741-1349111036486.jpgphotobucket-47384-1349111021616.jpg