UL-1, Steering

[silvermansteve]

i broke the pushrod connector, what i might have called a clevis, connecting the rudder pushrod to the servo arm. is this the correct replacement? i can't look because i threw it out.... here:

http://www3.towerhobbies.com/cgi-bin...?&I=LXMNN4&P=7

thank you!

[m4a1usr]

Thats the critter. At least if you want to go stock. I would recommend you move the servo arm from the top, arm pointing up, orientation to pointing down. If you look at the angles my own opinion is you get a tad more torque or force by making the change. Nothing scientific, just my dos centavos.

John

[silvermansteve]

i'll check out re orienting the servo arm when i put it back together. thank you very much.

[silvermansteve]

that was not the right part, too small not the same. just posting to clarify is all, in case someone orders it....