lipos that fit ????

[Rob DeAngelis]

any suggestions for hi mah hi c lipos for the UL1?

[Doby]

http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html

All you will need.

[JimClark]

take some measurements of your boat and then look at the different sites to see what will fit there are dimensions on the batteries on the web pages

[Doby]

http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html

All you will need.

These fit...used them all last season.

[detox]

Without going too heavy I like the Hyperion 4s 3300mah packs. Wire two of them parallel 4s2p for a total of 6600mah. They will fit cross ways or inline with hull.

[m4a1usr]

any suggestions for hi mah hi c lipos for the UL1?

Do the sponson mod and you will be able to fit most if not all 4S packs inside. I dont have a link to the modification but its here on OSE. The mod also reduces sponson walk at high speeds.

John

[Rob DeAngelis]

Thanks guys...

[Rob DeAngelis]

I hear ya... I was looking into that...

Do the sponson mod and you will be able to fit most if not all 4S packs inside. I dont have a link to the modification but its here on OSE. The mod also reduces sponson walk at high speeds.

John

[G-UNIT]

Cut openings in the sponsons and put the batterys in the openings, this will give you more stability a higher speeds, I did this with a 1500kv motor on 6s and it was great but nail biteing@ 63.3mph on gps, but I normally run 5s and will be going back to a stock set up and run 4s and see what the best speed I can get with different setups, I'm sure the best I could would be mid to high 50s, but spading the batterys does help with handling and room.
I run 5000 mah 40c-50c batterys