props????

[launchpad]

2200kv

[egneg]

I suggest a pair detongued X442's.

[srislash]

I think a pair of CR CNC 442's or 642's would be a good pic for you. I assume you will just be working out the bugs on 3s. It's gonna be slow. Will you be running 4-5s? If so a pair of 45mm props would be good in that range.

BTW, CNC are not optimum but with that range they are my safest suggestion for the amp draw on 6s.

[launchpad]

Hello;
Sorry for not informing of that. They are 2200kv thanks

[tlandauer]

From 3s to 6s is a wide margin, your motors would have to be fast enough for 3s and don't get burned with 6s. What kv?
Such a margin it is hard to give a specific size of props.

[launchpad]

I am building a genesis boat.Need info on props.It has 2-leopard 3674 motors;2- turnigy 180.I will be trying the amount of cells on each.Starting with 3 cell batts then progressing up to 6.Could someone suggest what prop to what will s I can use with the twin combo.This is my first build of a cat with twins.
Any suggestions would be great.