x457 prop

[rude5150]

Anyone know about how many amps will the X457 prop pull?

[rude5150]

How fast should I be go with a X457 prop?

[photohoward1]

Need a whole lot more info. When I put it on my Open Mono on 8s it pulls 300amps. If I put it on my retrieval barge it pulls 25amps. If I leave it on the bench it pulls "0" amps.

Anyone know about how many amps will the X457 prop pull?

[Chilli]

Hull type? Hull lenth? What motor? What Voltage?

[rude5150]

Catamaran,29", tp 4050 2220kv, 6s

[egneg]

Way to big it will

[Chilli]

Providing the motor size is adequate for your hull (Im not too familiar with the TP Motors). For sport running for a couple minutes, 4S with a prop in the 40-45 mm range would be much better on a motor in that KV range. For a few quick SAW passes on 6S I would still stay in the low 40 mm range because your RPM's on that motor on 6S will be very high. And that's providing your ESC can handle the amps.

[ron1950]

with your set up I run a m445...I have a x457 on a 47 in mono with a cc 2028 motor....you will blow that 2200 motor up if the esc doesent make magic smoke first

[Fluid]

Anyone know about how many amps will the X457 prop pull?

I ran a Castle 1515/1Y (2200 Kv) motor on 6S in my SAW recordholding 32" cat, and with a Prather 235 (about like an x550) ran near 90 mph with spikes of 350 amps. An x457 would spike well over 450 amps with an average around 350 amps - my guess anyway. Don't do it.




.

[keithbradley]

On a twin I would expect around 480A if the motor was actually capable of it, more on a single.

[kfxguy]

Catamaran,29", tp 4050 2220kv, 6s

On your miss geico? Your not being serious are you? Lmao

[rude5150]

Wow, I am loving the feedback and I would have tried it. Im so glad you guys gave me the heads up .
Great job guys.

[rude5150]

How fast should my geico 24 Tp4050 2600kv 180 esc 4s with m447 prop? How fast and how many amps will I draw?

[kfxguy]

How fast should my geico 24 Tp4050 2600kv 180 esc 4s with m447 prop? How fast and how many amps will I draw?

No one can tell you that man. I've had the strut placement drop me almost 10mph. Invest in a data logger and gps to know these answers. Everyone else has.....

[rude5150]

Ive got all mentioned. Ill go test it.