If money is no issue, leave you're revolt alone and build a boat that can handle the speed and put a Neu or castle motor in it.
Revolt 30 how too hit 70mph
Collapse
X
-
-
-
-
The first boat in my signature below gets there...................look what it takes to do it............Originally posted by dana View PostHonestly, I haven't gotten to 70 yet. That's damn fast...................So I really can't say, but I'm sure someone will chime inNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Random,
Here is a stock Revolt running a grimracer L45x68 prop.
I am personally not looking for more than higher 40's on my Revolt. If I ever decide to go faster I will build a new boat from scratch and select the appropriate hull that can take the speed.Last edited by gyrotron; 09-04-2012, 03:16 PM.
Comment
-
i had gps my revolt at 44mph stock with m445 back cut inside trims just about level with the hull
Comment
-
-
<iframe width="560" height="315" src="http://www.youtube.com/embed/U5d3FZViec8" frameborder="0" allowfullscreen></iframe>
Comment
-
-
You tryin to post this??????? Gonzo power you have there............get it on some glass and run wide open, she what she can do!! I say high 50's.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
and here's how you post a youtube vid, you were close, the two brackets should look like this without the spaces, its the only way i could show it here without it thinking there was a video.Originally posted by RandomHero View Post[XX]U5d3FZViec8[/XX]
[ y t ]
[ / y t ]NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Comment