help victory speed control not working

[daveisdiving]

hay guys maybe you can help i just bought a new victory 90 amp speed control did everything in the manuel for set up and is not working just blinks red thats it no response from it ruder works fine tho if any one has any idea of what it is let mekonw or that can help im using the new futaba 3pm fm radio

[saleens7]

.....edit.....

reason for edit in 3rd post

[saleens7]

oops...i forgot, victory is an Rc-Hydro's esc...nevermind...i dont see why it isnt working...

[daveisdiving]

ya not shure eather its made just for boating

[saleens7]

its is made for boating...although it could be used for other purposes, its primary purpose is for rc boats...rc-hydros is the name of the company that prodeces the esc, not that its just meant for rc hydroplane boats, just in case you were thinking it was...

[Jeepers]

try setting your end point adjustments(EPA) to 125% full throttle, (or what ever the max epa is on your radio) and the brake all the way to zero, se if that helps,sounds like its not seeing neutral for a few seconds.

[Steven Vaccaro]

Adjusting the trim seems like the issue. Also what size receiver pack are you using?

[daveisdiving]

the reciver pack is a hydrimax ultra nimh 1450mah 6.0v battery
il try the end points see if that will work

[daveisdiving]

ok tried the EPA still just blinking red any other ideas ?

[daveisdiving]

i did buy it from offshore electrics

[Rex R]

couple of questions fer ya Dave. where abouts do you run(or are planning to run) your boat(s)? if you can make it...the Madison area fast electrics are thinking of running this sunday(june10) in mazo perhaps we can get it sorted out.
did you set the throttle(tx) to reverse?

[daveisdiving]

il try that i might be able what time is it at i just have the one boat for now its a cen racing boat with the 700 motor on 14 cells and two 11.1 2100mah lithium packs with the x442 prop

[daveisdiving]

hi rex i tred with reverse and normal nothing still just blinking red thats it i testesd all cahnnels with ervo on reciver and they all work so dont no whats up with it ?

[Rex R]

weather permitting somewhere around 11:00ish.
can't help thinking its prolly something simple we're overlooking...like connecting the main power to the esc(though if the esc has a bec its thats out, since you said you had steering).

[saleens7]

maybe the esc to rx plug is upsidown (happened to be before...) put it in the right channel, but plug it in upsidown..