1/8 scale hydro brushless setup

[U.L. HYDRO DRIVER ICE]

Thanks

[U.L. HYDRO DRIVER ICE]

Would a lehner 2280 work on the 1/8 scale anybody

[Ub Hauled]

it would, but it depends on the amount of turns... I think 13 is the magic number, there are a couple of guys using that combo around here or at RRR.

[Tomcandersen]

Old thread, i now.. i have a 1/8 hydro and that I'm converting from gas to FE and are considering twin setup. Normally a 56 range motor on 8 to 10s Lipo would be good on a single setup but would twin TP 4060 on 6s do the job. My goal is 60mph+. Thanks for your reply ;-)

[MarkF]

I would use a TP 5860 650 kv or 5870 680 kv on 10s 10,000 packs and swing the same gas prop it ran before. Twins require more hardware, motors, esc, space and batteries. Speed would be 70+mph and not be a high amp setup.

Mark