More Mystery Controllers

[ReddyWatts]

I would always rather buy from you. The best service on the net.

[Flying Scotsman]

I can get the HiModel esc's if anyones interested. They are $62.00

Hate to say it Steve, but can you stick your company name with this product?

Douggie

[Eyekandyboats]

we have several HI model esc's and we have found problems. missmatched CAPS
25V and 35V... some with 25V and 35V caps on the same board.
other then that they are OK esc's

[Steven Vaccaro]

Hate to say it Steve, but can you stick your company name with this product?

Douggie

Doug not sure what you mean? If I sell them they will be unbranded. Hell I didnt even receive any instructions with the ones I ordered

[Steven Vaccaro]

we have several HI model esc's and we have found problems. missmatched CAPS
25V and 35V... some with 25V and 35V caps on the same board.
other then that they are OK esc's

I checked, all the caps are correct.

[Eyekandyboats]

Doug not sure what you mean? If I sell them they will be unbranded. Hell I didnt even receive any instructions with the ones I ordered

thats normal. use these instructions. they are the same

Setting:
1. Cut-off main power of speed controller, switch on the transmitter and receiver.
2. Move throttle stick to up position (full open)
3. Switch on the main power of speed controller
4. Wait for beeps of the speed controller

Options of set up:
1. Cut-off voltage
option 1. Ni-Mh battery, auto setup
option 2. cut-off for 7S lipo
option 3. cut-off for 6S lipo
option 4. cut-off for 5S lipo
option 5. cut-off for 4S lipo
option 6. cut-off for 3S lipo

2. Start-up mode
option 1: auto set-up throttle range
option 2: fixed throttle range
option 3: high acceleration (hard start)
option 4: low acceleration (soft start)
3. brake
option 1: no brake
option 2: light brake
option 3: medium brake
option 4: heavy brake
4. Running features
option 1: default running direction
option 2: reverse runing
option 3: hard brake
option 4: soft brake
5. Timing modes
option 1: 2°
option 2: 7°
option 3: 15°
option 4: 30°
6. PWM modes
option 1: 8K
option 2: 16K

[Flying Scotsman]

Doug not sure what you mean? If I sell them they will be unbranded. Hell I didnt even receive any instructions with the ones I ordered

Steven, what I meant is I would not sell a dubious product and live with the hassles thereafter. If one person buys one and tests their top rated capability without the magic smoke. I will send this one time user the cost of a replacement unit and of course the amp and voltage maximums must be documented for a period of at least 1 minute.

Douggie

[SJFE]

Steven
You stockem I'll buyem.

[Flying Scotsman]

Tom, with no disrespect Castle ESC's have allowed warranty payments that were not even close to their specs. Buy a documented esc as far as boat dynamics are involved.

Douggie

[Ctonez]

testing is always good...and testing these seems pretty affordable to most.
...looking forward to some feedback on these after some hard use on some high-amp setups.

[Steven Vaccaro]

Steven, what I meant is I would not sell a dubious product and live with the hassles thereafter. If one person buys one and tests their top rated capability without the magic smoke. I will send this one time user the cost of a replacement unit and of course the amp and voltage maximums must be documented for a period of at least 1 minute.

Douggie

I see what your saying. I always test products like this prior to selling them. if i dont personally test it, I enlist a person of known ability to do so. I dont have a way to test to 200 amps but can run it to 150 without a problem. I will give it a try.

[Doug Smock]

I'll put 200 amps on one for ya Steven!

Doug

[Steven Vaccaro]

I'll put 200 amps on one for ya Steven!

Doug

Ya, but can you log it? Thats the problem, I want to document the amp draw and capture it.

[SJFE]

Tom, with no disrespect Castle ESC's have allowed warranty payments that were not even close to their specs. Buy a documented esc as far as boat dynamics are involved.

Douggie

Douggie
Im my case CC Esc's are nothing but a waist of money. I don't race, push my setups and only make it to the like maybe twice a month. I refuse ( & Can't afford) to spend 200, 300 or 400 dollars when I can have a 62 dollar unit perform the same task.
No disrespect taken Douggie.
Tom

[Doug Smock]

Ya, but can you log it? Thats the problem, I want to document the amp draw and capture it.

I'm pretty sure one of my buds has the 300 amp expander for his Eagletree.

I find out and get back to you.

Doug