Zonda Cat 41" from Horracing

[drwayne]

so they are tp motors, tppower is the one who teach leo neu and the rest how to build fine motors...

hahahahahahahaha OMG you're so funny

so i will upgrade the coolings.

i have no idea how to mount my traxxas 2056 servo into this boat, what i need for that? what servo mount fits the servo? did i need a servo mount or maybe a radio box with servo mount? never saw such a construction before, i drived monos and deep v but never cats with that room in it.

sorry. I have a one answer per post limit.. which one do you want answered ?

[Mecka1990]

ok hehehe,

what i need to mount my traxxas 2056 servo into this: zondafgartr3.jpg

i only got the servo, no servo mount

[drwayne]

Apologies Ray.
The hulls I've assembled RTR came without motors installed..the TP were boxes inside the hull.
However RCB also bring in the assembled jobs.. saw a box of those with motors outback of store... 'assumed' TP.

Well, I've looked at RcBoat Bitz, Kintec and TP power and as I thought before I looked, there is no TP power 2075Kv motor but, there definately is a 2075 Feisuda motor, 2 pole motor. They put it in the stock Genesis and many, many other hulls also.

Neither Kintec or RCBoatBitz say in description that it is a 2100kv TpPower motor, just sdays 4 pole and I'll bet you it is a 2 pole FSD motor in black.

I bet you a blown 2075kv rotor, lol...

I think Kintec & Boatbitz made boo boo.... but, maybe Twisted can give us a real close up of the motors end bell and then we will know 4 sure.

The pictures from HOR show the 2 pole FSD motor because of the silver pan head scews for the endbell. TP power uses set srews. Save picture as, then zoom in....

[Fluid]

so they are tp motors, tppower is the one who teach leo neu and the rest how to build fine motors....

Yeah, right!

Darn that Steve Neu, now we know the truth - he's a ****** copycat!!

They don't sell these here and from what I have read in some of your post. You would like to sell them. You need to know that I would not have posted this if you would have been nicer to me. I take about selling something and you went off on me. ok I get it so know every time you want to sell something I will show everyone how to buy it cheaper. not fun is it?...if I choose to look and post them you should be flattered.

WTF?? Who is he talking to? That kind of threatening talk will get him banned. Good thing for him Steve's out of town.......



.

[Mecka1990]

Well, I've looked at RcBoat Bitz, Kintec and TP power and as I thought before I looked, there is no TP power 2075Kv motor but, there definately is a 2075 Feisuda motor, 2 pole motor. They put it in the stock Genesis and many, many other hulls also.

thats what i said, didnt find a 2075kv tp anywhere, thats why i didnt understanded it.
so they are feisuda 2 poles, gonna kick them out of the window and put my leos in there......

about the tppower and neu leo lesson, seems to be true, many people are talking about this.

WTF?? Who is he talking to? That kind of threatening talk will get him banned. Good thing for him Steve's out of town.......

i dont understand that to.


back to my question:

what i need to mount my traxxas 2056 servo into the boat.

[drwayne]

zondafgartr3.jpg

so they are tp motors, tppower is the one who teach leo neu and the rest how to build fine motors....

Yeah, right!

Ray, his knowledge of things seems somewhat incomplete.

ok hehehe,
what i need to mount my traxxas 2056 servo into this: [ATTACH=CONFIG]82719[/ATTACH]
i only got the servo, no servo mount

Use zip ties as a previous poster identified.
Place the servo into the area shown ( attached ppic) and hold with zip ties.
Perhaps joining an Austrian forum may help your language difficulty ?

[Mecka1990]

Gonna try.

An Austrian Forum about Rc boats is like flying pigs....

Thank you all for the answers, if i get the boat i will Upload some pictures And Drive videos.

[drwayne]

Some of those Austrian boats are the fastest flying pigs you'll ever see......



bye !

[Rocstar]

Suprising, he is usually very fast at shipping. Give it a couple more days or ask him for the tracking number and you'll know for sure.

Update: I ordered the hull on 7/29, it left Hong Kong 8/10, arrived in the U.S yesterday...so it should be here this coming week.

[twissted]

Funny you put people in that kind of light. You sound like a guy that gets his kicks from others that are learning.
Question do help others or just enjoy the learning curve?

[twissted]

I sent mine back today by airmail and hope to have another one soon. I hope he sends the 150mm push/pull rudder with it to cover the return shipping. Johnny said he would cover the return shipping. It cost me $57.65 so it should be a wash on the rudder.

[twissted]

I lookat these motors that come with the boat and the can is done well and the wires comming out of the can are flexable. I would say that they are custom ordered. Some motors are made to what you want as long as you buy a lot of them. Looking at the can I would say they are made by TP Power.

[twissted]

I replyed the way he cam at me. So jump on his wagon. Or is it full?

[ray schrauwen]

I lookat these motors that come with the boat and the can is done well and the wires comming out of the can are flexable. I would say that they are custom ordered. Some motors are made to what you want as long as you buy a lot of them. Looking at the can I would say they are made by TP Power.

Could you please post a picture and we could tell 4 sure but, I guess you packed it all up already??

I'm not saying they are 2 pole 4 sure, I'm just saying it looks that way in the picture and the first guy to sell these was HOR and he never put 4 pole motors in them.

Thats all I know or would like to know, thanks!!

[Cooper]

I'm curious...there have been a number of new members that have posted in reference to this boat...
Is there something on the HOR site that is suggesting people post here?

Me too is mecca twisted/ boater guy? If not sorry man cus things are just weird.