Surely you have to disconnect at least one of the BECs or both will try feed the Rx, i.e. double the required voltage. Or am I just being a bit thick?
-
-
Does HOR ship from the US? I don't know or never ordered from them, but I am just curious where they are based. ThxOriginally posted by twissted View PostComment
-
Just curious, how is their post sale service?Comment
-
Johnny owner of HOR is a great guy. I was a little surprised when the thread starter said it took him 5 days to get a response from HOR . I 1st introduced HOR drive cables on jrcbd and from there Tom @ Expresscraft has now started stocking large inventory of HOR parts. Hi will not be offering HOR hulls or artr boats as expresscraft lays up there own hulls. But I'm sure he could get any of HOR hulls or artr boats. I've found that the HOR cable was the same cable as the German cables and there only $15 for 22" 1/4 cable and it comes with prop nut and drive dog!! I've been running the same HOR $15 cable in my 36" sprintcat that's hits 85+ mph when it's running in flat water with light wind as you know any saw cat needs water and wind like described lol. Also HOR hardware is very nice and as been compared to speedmaster . HOR has many items that you don't find on every site and the best thing about HOR is they have boats and parts for FE and gas and some nitro stuff. I'm actually in the middle of a deal with HOR to build the 1st ALL HOR PARTS gas SAW boat for record trails . Shipping from HOR to the states or around 5 days and the shipping cost is only a few more $ than . I paid $6.67 for a cable , transom mount water pick up , and a few other parts and got my parts fast . I ordered on a Saturday night and they got here the next Thursday!!! For those of you that have any doubts about HOR DON'T!! . Now I'm not a FE guy ( working on starting my 1st FE ) but I have very fast gas cats and I have not ran a HOR hull or hardware yet but I'm working on it but as u said Tom from expresscraft has sold tons of HOR parts and if any of you guys are members of Jim's boat dock you know how hard those guys are on everything that's not made in the USA but HOR parts have gotten the big thumbs up!!! Ill keep you guys posted on the HOR parts . Hers a pic of 1 of my 2 cats that run HOR cables and my best 2 way pass was 87.6 mph with HOR $15 cable and it's been running the same 1/4 cable for 5 months with over 3 gallons of fuel ran on it !!!Originally posted by keithbradley View Post
Comment
-
HOR is in Japan , as I said Tom from expresscraft has a large inventory of HOR parts but I don't think he carries there hulls or artr boats as they lay up ther own well made hulls.Originally posted by gyrotron View PostComment
-
ok so i can plug both esc with bec into the y cable, gonna try.
PLEASE HELP :-(
need every detail about the motors what horracing puttet into this boat, they dont answer on any question i asked them, only got the shipping info and that i can run 2x42mm prop on it, nothing more, and the information that the page got is this:
Motors: water cooled 2075KV 3674 brush-less in-runner with motor mount (2x)
Thats so hard to buy such a nice boat but no informations whats the manufacture of the motors and the other informations, kv and size are really not enough -.-Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
shipping from hongkong like the shipping info i got, hahaOriginally posted by gyrotron View PostZonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
i try with 1 bec, thats the winner, everyone say that.Originally posted by gb tiggycat View Post
horracing got very nice hulls and hulls+hardware, but they dont answer any question :-(Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
yeah Saw-Usa got right, hor is a nice dealer, the only problem EVERYONE got with them is that they dont answer so fast, they got very much to do it seems, over 100 hulls are maden in the last half year.
edit: VERY NICE BOAT SAW! i saw it on a other picture with the full paintbrush, looking damn hot :-pZonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
Ok, so probably two weeks plus in order to receive anything from them...Originally posted by Mecka1990 View PostComment
-
Confirm for Hong Kong based. I've 5 hulls from HOR already (including bare hull for this 41" Zonda fiberglass version) and many hardware parts. Only had one time problem with the order when they sent me 150mm cat rudder instead of the 115mm I actually ordered. However, once notified to Johnny, he quickly sent me the correct one and gave the nice 150mm for free...Originally posted by Mecka1990 View Post
Comment
-
i ordered the boat + hardware on the 10.08.2012, it was shipped today, so i hope i get it next week.Originally posted by gyrotron View Post
i ordered the esc from ose @ the same day, get them on thuesday, only 4 days and over the weekend!^^Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
hahah, i hope i get something wrong to, hahahaOriginally posted by bikenewby View PostConfirm for Hong Kong based. I've 5 hulls from HOR already (including bare hull for this 41" Zonda fiberglass version) and many hardware parts. Only had one time problem with the order when they sent me 150mm cat rudder instead of the 115mm I actually ordered. However, once notified to Johnny, he quickly sent me the correct one and gave the nice 150mm for free...Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
Box shows Hong Kong.
Got mine in Washington state in 5 days just a few days ago. When you open the box check the front sides for cracks, the foam that holds the boat will crack the boat if shipping packs anything on the box. Happened to me. I have 2 large cracks on boath sides, about 10 and 12 inches long. Box showed on signs of stress. The cracks are behind the foam so I think mine was shipped this way and not from shipping. He asked for pictures for records and I think he"s sending another boat. I have not heard from him since he got the pictures.
twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
I ordered some parts from them at least a month ago and haven't seen anything yet...Originally posted by gyrotron View PostComment
Comment