New boat!!!

[keithbradley]

There was a guy here named "total package" (originally "x-factor") that was banned, came back under a different name only to be re-banned. That's who Rum was referencing.

[tlandauer]

There was a guy here named "total package" (originally "x-factor") that was banned, came back under a different name only to be re-banned. That's who Rum was referencing.

Thank you, I was dying, I know I am still a newbie, but this was totally beyond my capability to grasp! phew, now i can go to have dinner...

[Rocstar]

There was a guy here named "total package" (originally "x-factor") that was banned, came back under a different name only to be re-banned. That's who Rum was referencing.

That's too funny, I didn't know Total Package, I just thought you were referring to the OP with your list of how to be the "Total Package"

[lomdel]

Those 580XL motors are basically the same size as Castle 1717's................same diameter and 6mm longer. As mentioned, you may have trouble fitting them in width-wise. I'd suggest a pair of Leopard 3674's on 6s1p each..........the 1400kv. Keith has made similar size boats go extremely fast with smaller motors than these FYI.

http://www.offshoreelectrics.com/pro...74&cat=148

For what it is worth, I totally agree with the above suggestion! 1400kv's on 6S would be a sweet combo for this boat...

[Make-a-Wake]

Check out what this member did...................... Twin 4092's in a 40" Cat for huge speed..........................hmmmm

http://forums.offshoreelectrics.com/...40-156kmph-GPS

[ray schrauwen]

Keith it looks like I would need to make some mods and some polishing to get the quality your talking about.
I believe these are copies as well. [ATTACH=CONFIG]81952[/ATTACH]

If you have tips on installing these I'd really appreciate it. I'm just starting mine. Had the parts for 6 months.

[ray schrauwen]

That was basically a prototype hull...it was the first one to ever be built. It went 70mph on 10s with 80A ESCs but it was really spec'ed out to run on 12s.
There's a lot more speed capabilty in that hull. That boat was very mild and so stable a child could drive it at that speed!
If I build another one for myself it will run triple digit mph.

I'm looking to use my T600's 880kv on 12S... If I ever get the scale drives mounted!!???

[keithbradley]

I'm looking to use my T600's 880kv on 12S... If I ever get the scale drives mounted!!???

Hurry up. When you're done you can come mount the drives on my 73" mystic. Might as well throw the rudder on while you're back there...

[Flying Scotsman]

Sorry idiot, Twissted you have no boat and have posted pics of other members boats...where the hell are you comming from.

Douggie

[SAW- USA]

Good luck twisted . I have ordered a few parts from HOR and they are nice bits for sure. Tom from expresscraft is a HOR dealer and has a large inventory of HOR parts . We run GAS so no electric parts etc but hardware , the scale rudder, drives etc he's got all that. He's sales the parts for the same ad HOR and he's in Fl USA . Also the rudder your using does work great and a bunch of guys with big cats on jrcbd use them everyday . It isn't as nice as the $300 one from WD-200 but for $50 it's a great part and most are using 1 servo to operate it . Good luck on your build and u look forward to checking it out . As I said I have Rc boats (3)all and all have GAS engines and all 3 are cats. I only run SAW and I think that's the biggest reason I joined here . I'd like to build a CLASSONE Dragcat for a FE but I have no clue what to buy and where to start. I understand anything and everything for gas boats but most guys do as we all have something's that's a 2 stroke lol. My best 2 way adv. pass is 87.6 with a 36" sprintcat with 29.5 butch the boat man engine , quickdraw style hot pipe turning a 3218/2 !! and my other 2 boats are 1 more sprintcat and a new Blazer rigger kit not yet built . Once again good luck with your build and hope the expresscraft info helps you and others that want to try HOR parts now that you know there's plenty of HOR parts in the USA. Here is a pic of my cat . It's going to be custom Hydro dip job that will match the cowl , below is another pic of a custom drag cowl for the same hull I hydro dipped these myself , also the cowl attached to the hull now was hydro dipped by me as well and if you need a part or parts dipped let me know I'll be glad to help . Hydro dipping is very durable and cost much less than paint and as you can see it can be custom as well .

[twissted]

House Cleaning

[twissted]

House Cleaning

[twissted]

pictures

House Cleaning

[twissted]

House Cleaning

[ray schrauwen]

Nice prop work. Yes those props really do need a bit of tinkering like you have done to ge the most out of them.

May I please ask for a picture of the drives from below? It would help me alot for installing mine. Thanks for all the pics!