HK 5682 1700kv Pro Competition

[Snowride]

Wow, this seem to be a beast. Anybody have any experience with this. According to 1 reviewer it is a rebranded TP. Also says it has more power than the same 5682 by Leopard. Would this be overkill in an Osprey? Can't believe the price. http://www.hobbyking.com/hobbyking/s...%5F1700kv.html

[Rumdog]

Rebranded? It say Turnigy Power right on it. (TP) Not sure what would mak it more powerful than the Leopard

[Snowride]

I sure as heck don't know and this is why I asked the question. This is supposed to be a rebranded TP power motor like this. http://204.186.93.64/TPPower.htm This is a quote from a reviewer. "It is definatly a TP Power Motor- Parts inside and Cables from the same manufacture." Only trying to get some info to see if someone here can confirm this.

[Rumdog]

lots of the reviews on there are purely BS. I've seen reviews before a product was even available.

[bill34207]

Ask rckong what he thinks of his. He put one in a 36" Sprintcat for Q. Seems I recall hearing something about a "real turd" after a couple of laps aeound the lake.

[bruiser77]

Took your advice bill and talked to RCkong and there were other variables involved, throttle curve and a bad cell. He said he will get a proper test over the weekend. im hoping it does much better because i purchased two 5692's from HK.

[scottw]

Hi
has anybody actually run these TP Pro motors in a boat??

The 5692 1000kv claims 6000watts? thats insane....at approx $75USD...

Scott

[Snowride]

Hi
has anybody actually run these TP Pro motors in a boat??

The 5692 1000kv claims 6000watts? thats insane....at approx $75USD...

Scott

That is why I posted this. The prices are 3 times less than the branded stuff and if there is any truth to the power rating then holy cow. If the bearings are not as good it's really not a big deal to put in high quality ones IF they were to go bad. The Pro Comps are 4 pole rotors, 16 segment field stators. FYI, The 1320KV is also rated at 6000W.

What kind of ESC would one require if this were to be run in a 41-42" mono like the Osprey? Would a T180 be asking for trouble or is a 240 required on a 6s setup with the 1320kv motor?

[Snowride]

Delete

[Snowride]

What kind of ESC would one require if this were to be run in a 41-42" mono like the Osprey? Would a T180 be asking for trouble or is a 240 required on a 6s setup with the 5692 1320kv motor?

Anybody have any input on the above?

[Fluid]

How much power are you looking for? If you prop for 4000 watts on 6s then a 180-amp controller is just too small. I prefer to use an ESC which is overkill - less chance of a burndown. So a 240-amp high volt controller would be preferred.





.

[Snowride]

Thanks, that's what I thought but not sure as I am still new at this. Just don't like the going price for the 240. Heck the boat and motor cost less but guess it is what it is.

[Brushless55]

This 5682 could be a good runner in a DF33 for P-Mono..!

[Mel279]

hey guys

I run 2 x Turnigy T5682 1050kv, 10s setup in my EPV 135 53" twin cat. It run really fast and FYI its a 6-poles motor. Here a video of my boat running, the pond too small so I can only pull the throttle 1-2sec only and don't mind the gas boat. http://www.youtube.com/watch?v=Ab0GuD5-5UQ

[iamandrew]

Hi there
ive got the motor, i was going to install it into my MMP Rapide but i think it might be overkill, it with its mount its pushing 800grams.
I was going to run it on 5S with a T180 in that hull, but not sure now!