Turginy balance connectors

[Flyguy55]

Do Turginy balance connectors match with Hyperion chargers with out adaptors ?

[sailr]

Gawd only knows. I wish they would standardize the danged balance connectors!

[lectriglide]

I'm pretty sure they don't.

http://www.allerc.com/product_info.p...oducts_id=3159

Turnigy uses a JST-XH balance connector. Looks like you need the HP-LB10-XH balance adapter.

[Diesel6401]

I'm pretty sure they don't.

http://www.allerc.com/product_info.p...oducts_id=3159

Turnigy uses a JST-XH balance connector. Looks like you need the HP-LB10-XH balance adapter.

That's what I needed to buy for my hyperion charger, except I purchased mine from rcaccessories.com same part number and looks like it's about $1 cheaper from allerc though.

[Rumdog]

Turnigy's are the same as MOST lipos.

[JimClark]

There are only 4 or 5 different types.
If you have hyperion charger now you should be able to get an adaptor that would go from the JSTXH to the hyperion from hobbycity. i got some 2s adapters for my small zippy's
Jim

Turnigy's are the same as MOST lipos.

[scooterP]

I think that they will hook directly to your hyperion charger. I have an Bantam BC8 and the adapter that I use to charge Turnigy 2s packs in series is designated for "Hyperion and Polyquest".

[Flyguy55]

Thanks everyone for the input . Looks like yes , no , maybe . Anyone have any first hand experience ?

[JimClark]

Turnigys have the JST-XH balance tap
Hyperion uses a different one you need an adaptor or a JST-XH balance board for your charger
Like it was said above in post #3 you need a Hyperion HP-LB10-XH balance board these other guys that say they will are totally off base and yo are gonna screw up your batteries

[scooterP]

I am so sorry. Here I was talking out of my arse again. I got my balancing adapters mixed up. I use a couple of different ones.

It appears that you use the adapter for align. This is the board that I use with my Turningy 2s packs.

I hope this helps.

[detox]

This is the one I use with my Turnigy lipos and Hyperion 606 charger. I purchased this XH version from ALL E RC when I purchased my charger.

http://www.allerc.com/product_info.p...oducts_id=3159

[Diesel6401]

I bought this last week. I did use the one detox posted before. I hooked it up 2 2s zippy's and set the charger to 4s. Everything checked good and began to charge at 4amps, but I only let it charge for about 3 minutes to verify it worked. Haven't used it since I've been out of town alot lately, but it appears to be a good $6 investment. Nice part it comes with several different balance plugs for different chargers. It works on hyperion, but did not fit my Triton.

[Himalaya]

for 4S and above, yes, they are compatible.
for 3S and below, just change the adapter board.

[Flyguy55]

Thanks , I ordered the correct adaptors from ALL E RC today