Lipo Load Bank for Discarging (moved from swap shop)

[RaceMechaniX]

Hello Chris,

Those you linked are 100 Ohms and ideally you want something closer to 1 Ohm.

Tyler

[CraigP]

The link says 100 ohms Chris. You’ll probably need all four of those in parallel to get you a 25 Ohm resistor. That’s still under an amp on 6s... 10 or 5 Ohm is a more workable discharge current. Are you using for maintenance discharging or to kill old batt packs?

[dasboata]

Hello Chris,

Those you linked are 100 Ohms and ideally you want something closer to 1 Ohm.

Tyler

figures I jump the gun

The link says 100 ohms Chris. You’ll probably need all four of those in parallel to get you a 25 Ohm resistor. That’s still under an amp on 6s... 10 or 5 Ohm is a more workable discharge current. Are you using for maintenance discharging or to kill old batt packs?

I'm going to try to cancel them thanks Guys