I ordered and received a pair of 6s 65c 5000mah Turnigy A-Spec Nano G2 packs. Haven't test them yet, but I will this weekend. I'll report back after I've collected some data. My fingers are crossed that they are as good as my Dinogys.
Best Lipos for the buck ??
Collapse
X
-
-
-
Thank you. The 4200's would fit better in my Whip 40 and are cheaper so, I'm still waiting on confirmation of actual size and weight.
Nortavlag Bulc 
Comment
-
good prices but most look like hard case packs?Originally posted by AMP EATER View PostSMC RAcE FORMULAS.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Many I looked at are 2P inside... This is how they create a 70C pack, 2 x 35C cells in parallel inside. Impossible to know if one of the parallel cells is bad as it will only read the higher voltage of the 2.
Just looked again. Unless you are running 3300 or 2550Mah packs, the rest are ALL 2P packs. Total waste of money for boats. These are rc car specific where 2P is very difficult to arrange in a car unless it's built into a single pack. You can buy better and cheaper from HobbyKing.Originally posted by AMP EATER View PostSMC RAcE FORMULAS
I own a pair of HK Traxxas 7.6AH 2S2P packs I run in LSH only on spec AQ motors. I would never, ever ask more that 80-100 amps from this pack that is rated at 40C-80C. If I knew they were 2P before I bought them I would have passed on them as HK Typo'ed their description.
Buyer beware!
Buzz is a smart guy, worth talking to if you understand voltage under load and internal resistance numbers.Last edited by ray schrauwen; 05-09-2014, 10:01 AM.
Nortavlag Bulc 
Comment
-
I spoke to Buzz on the phone and he is getting a new shipment in shortly and fixing his website asap too. He did say that there very well may be a TYPO in the 4200 6S pack as it's size and weight are far too small for it's capacity.
Just waiting on the new shipment
Nortavlag Bulc 
Comment
-
Buzz is a very knowledgable guy, I'm not totally dumb when it comes to Lipo batteries but talking to Buzz is like talking to a live Lipo Tech manual!Originally posted by ray schrauwen View PostI spoke to Buzz on the phone and he is getting a new shipment in shortly and fixing his website asap too. He did say that there very well may be a TYPO in the 4200 6S pack as it's size and weight are far too small for it's capacity.
Just waiting on the new shipment
Comment
-
Originally posted by ray schrauwen View PostMany I looked at are 2P inside... This is how they create a 70C pack, 2 x 35C cells in parallel inside. Impossible to know if one of the parallel cells is bad as it will only read the higher voltage of the 2.
Just looked again. Unless you are running 3300 or 2550Mah packs, the rest are ALL 2P packs. Total waste of money for boats. These are rc car specific where 2P is very difficult to arrange in a car unless it's built into a single pack. You can buy better and cheaper from HobbyKing.
I own a pair of HK Traxxas 7.6AH 2S2P packs I run in LSH only on spec AQ motors. I would never, ever ask more that 80-100 amps from this pack that is rated at 40C-80C. If I knew they were 2P before I bought them I would have passed on them as HK Typo'ed their description.
Buyer beware!
Buzz is a smart guy, worth talking to if you understand voltage under load and internal resistance numbers.
Think I need a little education on the 2P packs vs single setup???
I would think they would be just as strong....NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Well I've been testing my pair of 6s 65c 5000mah Turnigy A-Spec Nano G2 packs. And after the initial 3 break in cycles, I've got 5-6 runs on them, and they've performed very well so far. I have recorded my fastest pass so far at 92.3mph with them and I'm getting about 3-4mins of runtime. After that pass the Batts came back with a logged temp of 107°f. I'm pretty happy with them, but I'll keep you guys posted. They should really start coming to life in about another 5-6 cycles.HPR 115 - Lenher 2240/7, AS26- 150BL EVO ll esc's 92.3mph

Comment
-
Thanks for the update Richard
how far down are you running them during your runs?.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
I've taken them down to between 30-40%, with no swelling or puffing of any kind.HPR 115 - Lenher 2240/7, AS26- 150BL EVO ll esc's 92.3mph

Comment
-
Comment