Lynx (bobkat's evil "twin")

[peells]

Bottom and sides all on

Well I have been busy to day Church and a little model boat building, So here are some more photos to track the progress with. showing the steps (Full) and the skins, Now I will be fitting the motors and finishing the motor mounts, and I will be looking for some nice neat area to stuff the Esc's into to help keep things clean.

[peells]

Two more photos

Here are two more views for you all to look at

[peells]

General gear placement

Well today I mounted the motors, and got the stuffing tubes in place, and I laid out the gear in just about the locations it will stay in (if I don't run into a snag)

Well have a great evening

[6S HYDRO]

Cool

[peells]

Why Thank you

[Rumdog]

Do you ever sell any of your builds? This little cat looks awesome!

[peells]

Water tight

Well there is a love to doing this I guess as I have been at it off and on all day!!
I used epoxy resin on the interior and added some fiber glass cloth to the tub, 2 layers at the back where the servo is going, It sort of looks like I am going back wards in the pictures putting the boat together and taking it back apart and all.

And to answer Rumdog's question everything is for sale at the right price.

[ace028]

Looks good, so I take it that you have everything mounted on the transom? or at least located? You are making some quick progress on it. Did you use the epoxy sparingly like I did on my boat, so that you have the nice texture to the fibers, yet they are still coated? It looks like your angle on the mounts is good, thats all I needed in mine.

[peells]

Yes I had everything mounted at rhe transom and I used the excess epoxy to coat the rest of the inside and I do have nice texture now I need to make the enlarged hatch and stand off box for the rudder, I used all scraps for the skin and the stringers except for the kit which I had laser cut.

[zanda]

i dont have anywhere close by me to get her laser cut what would you charge to send a set to me in aus? pm me cheers

[peells]

The top and stand off box

Well I got busy last night , and did a little work sorry for only 2 pictures but I am getting ready for work, I said I was going to make a really large hatch.

[CornelP]

I don't think it gets any larger...

[peells]

Yea I kinda Maximized this one, as I saw how tight my son's was and I thought it might make the set up a little smoother

[peells]

The hatch

Good morning all,
Well here are a couple of not so exciting pictures but none the less all part of the build!! Here I am warping the hatch (bending it to my will) I hope at least that is what is happening, Well you can see all the tape holding it down to the desired shape (for now at least) I tried to get a shot real close so you can see the pieces of balsa blocking I used to push down the edges you may have to strain a bit to see them or not?

Happy Building,
Pete

[Flying Scotsman]

Very nice Peter and an interesting step design.

Douggie