Diegoboy's Stretch Renegade rigger

[Meniscus]

Diego, the build looks great!!! I'm surprised how close the antenna matches. I have that deans connector if you want to do another rendezvous. Just let me know.

Astro Cooler:

Link: http://bbyracing.com/elechardware.asp (scroll to very bottom) He may have in different sizes available. I can't remember if I asked him that. I would recommend replacing the fittings with right angle or 90 degree type.

[Diegoboy]

Okay, so she's not really done. I still need a male Deans! Then I can cut the battery wires to length

[Diegoboy]

DONE!!
Please excuse the dust on the boat as I've been working on her boat stand & other boats as well.

[Diegoboy]

I don't know what an Astro cooler is, but Steve E told me that the cooler on this motor was also a prototype that he had custom machined for it.

[6S HYDRO]

What is an astro cooler, the only reason i even asked diego is because i have already contacted steve elias and he told me you cant get one. This is the only one as i was informed. Correct me if wrong

[Meniscus]

I know, I wouldn't have had the heart to even jokingly mention that one.

I'm not saying anything else about it. I just seems a shame.

[Diegoboy]

While you're at it, I'll take the left sponson please...

Just my opinion, and I'll get off the soapbox.

...but the right sponson has the water pick-up.

[Meniscus]

After careful consideration, my initial response was "no" but I have decided to let it go. so, "Yes"
(hoping I dont regret it later)

I think that's wrong. If I'm not mistaken, that was custom made for the original. That just seems a shame, especially since he can pickup an Astro cooler for his purposes. I'd sooner give you $25 not to see it broken up. It's one of the integral elements of the design for that one in particular. While you're at it, I'll take the left sponson please...

Just my opinion, and I'll get off the soapbox.

[egneg]

but those are the wrong color. They're teet brown!

So use black sharpie.

[Diegoboy]

Just let me know when you're ready

[6S HYDRO]

well cool, ive been low on funds lately so you can have a week or so to reconsider.

[Diegoboy]

id give 25.00 for the cooler, also id thing about reinforcing the turnfin wood with some carbon plate- mine broke off in a hard corner, and i had to epoxy it back together w/ a thick piece of shock tower carbon i had lyin around

After careful consideration, my initial response was "no" but I have decided to let it go. so, "Yes"
(hoping I dont regret it later)

[Diegoboy]

but those are the wrong color. They're teet brown!

[egneg]

You are correct, they are much stiffer than we require. (thick rubber)

Try petsmart - nipples (bottle) for newborn small pets work great and have a double lip - just have to enlarge the hole for the servo rod.

[6S HYDRO]

id give 25.00 for the cooler, also id thing about reinforcing the turnfin wood with some carbon plate- mine broke off in a hard corner, and i had to epoxy it back together w/ a thick piece of shock tower carbon i had lyin around