UL-1 Build. 55mph+

[nate]

Oh, didn't see it on their website. I'll look again. Might be a winner after all.

It seems to work for my need, but I don't feel comfortable holding it almost pinned in the corners going in and out of turns, I feel like it wants to blow over, and the Grim fin is way to much drag IMO.

Like I said, Ill make another TF for my UL-1, Did you see the one that I made for Todd on Darin's old Ul-1.. Its pretty sweet..

Todd get some pics with it on the boat...


Heres the one I made for Todd. Less Tuck.

[nate]

Ill sell ya one cheap Sailr. Like 15.00 shipped.

Get a drawing of what ya need if you want one that is.

[nate]

[sailr]

Thanks Nate. I definitely want one like the one in the pic on the UL-1 (including a bracket or not? Bracket is hard to come by). and a couple more. I have a Climate Matrix rigger that needs a fin but I don't know where to begin as far as design.

Ill sell ya one cheap Sailr. Like 15.00 shipped.

Get a drawing of what ya need if you want one that is.

[nate]

Yes I have one Ul-1 bracket left, Not to be a pain but I charged the last dude 6.00 extra for the bracket..

Plus as you said..

But I can deffinatly get you one made like this for your UL-1.

Bracket and turnfin with bolts..$22.00 shipped...

I think thats a deal...

Let me know and Ill get ya my paypal..

[nate]

Thanks Nate. I definitely want one like the one in the pic on the UL-1 (including a bracket or not? Bracket is hard to come by). and a couple more. I have a Climate Matrix rigger that needs a fin but I don't know where to begin as far as design.

Also, how long is your matrix rigger?

[sailr]

Length from transom to front of sponsons is 26-5/8". Overall length from trailing edge of the rudder to the front of the sponsons is 30-1/4:. I see riggers with the fin on an 'extension', putting the turn fin well behind the sponson. I'm new to riggers and don't know ANYTHING about the fin setups.

I wish somebody would write a tutorial about turn fins...the science of it, etc. How wide, how deep, what angle, on outside of sponson at angle or inside of sponson straight down, etc. etc. ... and the application to different types of hydros and riggers. I see in your pics you have the fin mounted in the 'middle' of the back of the sponson. That's a third approach I've not seen before.

I understand spin fins...that's simple! ;-)

Also, how long is your matrix rigger?

[nate]

Length from transom to front of sponsons is 26-5/8". Overall length from trailing edge of the rudder to the front of the sponsons is 30-1/4:. I see riggers with the fin on an 'extension', putting the turn fin well behind the sponson. I'm new to riggers and don't know ANYTHING about the fin setups.

I wish somebody would write a tutorial about turn fins...the science of it, etc. How wide, how deep, what angle, on outside of sponson at angle or inside of sponson straight down, etc. etc. ... and the application to different types of hydros and riggers. I see in your pics you have the fin mounted in the 'middle' of the back of the sponson. That's a third approach I've not seen before.

I understand spin fins...that's simple! ;-)

OK Well Ill get the UL-1 Turn fin made this week and get ya some pics to make sure ya want it.

Ill also get a Turn fin made for your rigger, I wont charge you for the rigger TF cause Im not sure it will work great, Ill try tho.

[bigpapa]

how about a smaller pair for my sv doc nate please please

[sailr]

Thanks Nate. PM me and tell me what I owe you and your paypal.

Jim

OK Well Ill get the UL-1 Turn fin made this week and get ya some pics to make sure ya want it.

Ill also get a Turn fin made for your rigger, I wont charge you for the rigger TF cause Im not sure it will work great, Ill try tho.

[bigpapa]

hey jim i have a ul-1 turnfin from nate it's nice

[sailr]

I'll bet it is. Judging from the pics he does a super job!

hey jim i have a ul-1 turnfin from nate it's nice

[nate]

how about a smaller pair for my sv doc nate please please

Ok Ill try and get them done by this Weds.

Thanks guys. Ill let yall know!!

[bigpapa]

tks nate

[bigpapa]

you can ship mine when they are done do not wait with the motor please