Mystic C5000 (44.8 inch) Twin setup suggestions

[xkos]

Yesterday, it was the first test.... 2-3 minutes
I wanted to check temperatures and water cooling first.
I need to make some repairs... also i need to find out which is the best prop for this beast....
...i'm very close to the final setup.

[Xcesive8]

Oh nice work!
Cant wait to see a vid of her runnin.
What props were you using for the maiden?
What repairs you got to deal with?

[xkos]

i tried a pair of abc props 2 blades 45mm.... after that i will try some props from propshop..
I have to put some silicone in a couple of screws...i hate water inside the hull

[vvviivvv]

Did you use 1521/1Y? 6s? Any idea on temps or speed?? Mine ain't seeing water till I'm sure I won't burn anything I have the propshop props you mentioned earlyer in the thread 3 blade 45/18 did you get them?

[xkos]

vvviivvv's: don't try at the first run these props....45/18/3 are Saw props... and you need German escs.
About the speed...i can not estimate yet... but certainly 1521/1Y have a lot of power and torque....maybe 7s is my next choice...

[vvviivvv]

My controllers are german they have powered 3060's in saw set ups a 1521 should be ok

I look forward to more results, we can compaird the hull's performance

I'd like to know more like amps your drawing are you using high end lipos or china?

[vvviivvv]

vvviivvv's: don't try at the first run these props....45/18/3 are Saw props... and you need German escs.
About the speed...i can not estimate yet... but certainly 1521/1Y have a lot of power and torque....maybe 7s is my next choice...

you got any numbers yet?

[Rumdog]

Can I get a direct link on where you guy's purchased this hull?

[bjornar]

Can I get a direct link on where you guy's purchased this hull?

http://www.mhz-engines.com/

[Alfa Spirit]

Can I get a direct link on where you guy's purchased this hull?

Check the direct link

http://www.mhz-powerboats.com/shop/shop.htm?lade=artikel3484.htm

[xkos]

first ride

http://www.youtube.com/watch?v=zowSZLN0diE

[vvviivvv]

Any data? Did you start with 442 props? I will maiden mine in approx 3 weeks but with x447

[xkos]

...and the second one...

http://www.youtube.com/watch?v=WADz__uOdog

vvviivvv: 442 props are small props for this setup, unless you are going to play above 40.000 rpm
I started with a pair of ABC 45mm. Speed controls and motors were cold so next time i will try a pair of octura x447. About the speed... i don't have gps yet! but if you want to have fun and play cool 6s is the choice....7s for really good speeds.!

[tomstoys2]

Great job xkos! She looks awsome in the water.

[DINO7]