Renegade Rigger...

[Meniscus]

I am not recommending yet until I do some more testing. I cannot say for sure that it doesn't get hot yet and don't want to misguide you. Plus, I plan on water-cooling the Ammo. The Ammo is a 28-35-2700 and specs are listed below. The motor mount is.....well..........wood, LOL! At least for now.

SPECS: Motor Diameter: 1.1" (28mm)
Motor Length: 1.378" (35mm)
Shaft Diameter: .126" (3.2mm)
Shaft Length: .591" (15mm)
kV Rating: 2700 rpm/V
Weight: 3.3oz (94g)
Input Voltage: 11.1-18.5V
Max. Constant Current: 15A
Max. Surge Current: 30A
Max. Constant Watts: 278W
No Load Current: .8A

[sailr]

That's a purty lil' boat!!

[HOTWATER]

I am not recommending yet until I do some more testing. I cannot say for sure that it doesn't get hot yet and don't want to misguide you. Plus, I plan on water-cooling the Ammo. The Ammo is a 28-35-2700 and specs are listed below. The motor mount is.....well..........wood, LOL! At least for now.

SPECS: Motor Diameter: 1.1" (28mm)
Motor Length: 1.378" (35mm)
Shaft Diameter: .126" (3.2mm)
Shaft Length: .591" (15mm)
kV Rating: 2700 rpm/V
Weight: 3.3oz (94g)
Input Voltage: 11.1-18.5V
Max. Constant Current: 15A
Max. Surge Current: 30A
Max. Constant Watts: 278W
No Load Current: .8A

No worries! I am only interested in the setup I have on it now...well...at least for a while. No Ducted Fan testing with it in the near future...LOL!!! I do like the water cooled mount(s) on OSE though.

[HOTWATER]

That's a purty lil' boat!!

Thank you sailr! I have been building it very s l o w l y since Dec. Have also been working on the Rigged Insanity(Awesome kit- Thank you Taylor!) at the same time. It is in the painting stages right now.

-Kent

[HOTWATER]

Meniscus or Diego, Are either one of you running some sort of thrust bearing on your Renegade? Maybe on the strut?

-Kent

[hookedup]

not on the renegade, but i run one on all my "big" boats. on the motor shaft between the coupler and the motor.

[HOTWATER]

not on the renegade, but i run one on all my "big" boats. on the motor shaft between the coupler and the motor.

Thanks hookedup! Yeah, I am going to use one on my Rigged Insanity UL-1 motor.
Just curios about the small outrunner setup. By the way, I did run into something else this afternoon while finishing up my Renegade...I was wondering if I can run the Phoenix 25 with the factory settings "as is " out of the package? It says you can but I don't know for sure. I did buy the USB cable for programming but do I really need to change any of the default settings?

Thanks,
Kent

[HOTWATER]

Thanks hookedup! Yeah, I am going to use one on my Rigged Insanity UL-1 motor.
Just curios about the small outrunner setup. By the way, I did run into something else this afternoon while finishing up my Renegade...I was wondering if I can run the Phoenix 25 with the factory settings "as is " out of the package? It says you can but I don't know for sure. I did buy the USB cable for programming but do I really need to change any of the default settings?

Thanks,
Kent

ANYBODY?

Thanks

[Meniscus]

Sorry Hotwater, I've acquired mine second hand so I don't know.

[HOTWATER]

Sorry Hotwater, I've acquired mine second hand so I don't know.

No problem Meniscus...Thank you for chiming in though!

Just finished with the elec. and hardware today. I put it on a scale and it weighs 12.5 ounces minus the flex and prop. I was surprised to see that, considering the sealer, 1 coat Kilz, 2 coats primer and paint that I put on it!!

[Meniscus]

Well, my green one needs to be repainted. I was looking for some fluorescent green with a little yellow. The paint I found ran like crazy and had globs :S

Maybe I'll try something different. I have an idea for a paint scheme for all of my boats. My Blackjack is currently being painted with that scheme. We'll have to see how it turns out, but all of my boats may get a similar scheme.

[HOTWATER]

Well, my green one needs to be repainted. I was looking for some fluorescent green with a little yellow. The paint I found ran like crazy and had globs :S

Maybe I'll try something different. I have an idea for a paint scheme for all of my boats. My Blackjack is currently being painted with that scheme. We'll have to see how it turns out, but all of my boats may get a similar scheme.

My Rigged Insanity will have the same paint scheme as this one (Renegade) with a couple more "sponsor" decals on it. It's gonna be the little Renegade's big brother!

[HOTWATER]

AMP Brothers...

[Meniscus]

That will be cool. Only thing is, the Renegade may end up faster! J/K

[HOTWATER]

That will be cool. Only thing is, the Renegade may end up faster! J/K

LOL!! You're probably right! Well, I hope one of them will be fast...

Man, I gotta tell ya...building this thing required a little patience and the hands of a surgeon at times. Some of it reminded me of that game Operation!! DOH!! I'm used to working on glow boats, a bit bigger than this one, but I am getting to like FE boats!