HPR 5009c bulletproof build

[nata2run]

I make those parts by the way ��

[Bradb74]

Awesome.. what a small world. I'm sure when everything arrives I'll have a few questions for you regarding the installation.

[Bradb74]

Ok, just found a vid of the boat and wow. This guy is running 105.5 mph on two TP 4050 2350Kv, two T180A esc's, two 6s 5000's, two X457 props cut down/modified.

Hi John, I ordered a set of sharpened and balanced x447 octras and a set of x457 octras to cut down.

From what I've read I need to cut them down to a 50mm. Do you have any experience with this?

Thanks

[Prodrvr]

Hi John, I ordered a set of sharpened and balanced x447 octras and a set of x457 octras to cut down.

From what I've read I need to cut them down to a 50mm. Do you have any experience with this?

Thanks

Sorry, I do not.

[Bradb74]

Ok cool, I'll consult the Oracle and see what I can find.

[fweasel]

Hi John, I ordered a set of sharpened and balanced x447 octras and a set of x457 octras to cut down.

From what I've read I need to cut them down to a 50mm. Do you have any experience with this?

Thanks

Contact Chris Hoffmann, member Dasboata

[Bradb74]

Will do, thanks

[srislash]

Contact Chris Hoffmann, member Dasboata

If you are to get some reduced 457’s done detounge them and remove some blade area. Make sure to tell Chris this oryou will draw unecesary amps

[Bradb74]

Hi all

My hull finally arrived today from Switzerland :-)

I'll start the build in a week or two when I have a little time off.

20171201_204847.jpg

[fweasel]

Just got my C5009 hull and hardware in as well. I won't be starting my build for a while, so I'll be watching your progress for ideas.

[Bradb74]

Cool, we can compare notes.

[srislash]

Just got my C5009 hull and hardware in as well. I won't be starting my build for a while, so I'll be watching your progress for ideas.

So are we all going to be comparing notes on running come spring? Haha

[dmitry100]

How are the new HPR hulls (the new guys who took over HPR) are they of the similar or same caliber of that of Hans?

[fweasel]

So are we all going to be comparing notes on running come spring? Haha

Mine will be rigged within an inch of its capabilities and my notes may have more to do with aerobatic properties than hydrodynamics!

How are the new HPR hulls (the new guys who took over HPR) are they of the similar or same caliber of that of Hans?

My hull is an older, HPR layup. I have not personally seen one of the new ones up close.

[Bradb74]

I'm not sure how the new ones compare. I'll thake some closeup pics this evening.