Lady Nelson By Amati

[CraigP]

Beautiful boat! Is that single battery on one side going to give you a weight shift! Maybe in final trim, run a pack on each side...

[RandyatBBY]

Beautiful boat! Is that single battery on one side going to give you a weight shift! Maybe in final trim, run a pack on each side...

That was just for testing, it will have in the end deans and a y for 2P. I have to do much clean up of wires and hose too.

[RandyatBBY]

Little better shot of servo mount.

[Rcsurfrider]

have you tested the drive in the water yet?

[RandyatBBY]

have you tested the drive in the water yet?

No not yet, too hot and too much work in both of my shops.

[CraigP]

You got that heat thing right! Burning up here in Tulsa... I got a Prather SS prop to try, but it's like Mars out there...

[numse]

Nice build :O)
The TFL outdrive is beautiful.
I'm building the same boat, but with 2 TFL outboards. Because of the added weight, I glued a 2 inch kevlar band to the inside of the hull where the molds where glued together. I don't think it's really necessary, but just in case.

IMG_2284.jpgIMG_2294.jpgIMG_2325.jpg

[RandyatBBY]

I spent 5 hours gluing yesterday so I am getting close to the finish of this project.

Hatch in back is all that is left to build and finish.

[Beaux]

Cool boat. Love the outdrive.

[RandyatBBY]

I built the hatch. fitted it yesterday. still needs to finish coat.

[fweasel]

Beautiful boat.

[RandyatBBY]

Beautiful boat.

Just trying to do it justice. thanks

I need to find a good clamping system for the windshield. While trying to pull the front seats out the glue on the windshield came loose. I just do not want to end up with a lot of glue build up.

[Rcsurfrider]

Update?

[Rcsurfrider]

Hey randy! How did it turnout?