Darin's DYMotorshop 33.5" P-Mono Build

Collapse
X
Collapse
 
  • Page of 6
  • Time
  • Show
Clear All
new posts
Previous 1 3 4 5 6 template Next
  • kfxguy
    Fast Electric Addict!
    • Oct 2013
    • 8750
    #76
    Originally posted by Darin Jordan View Post
    Clear I used is PPG 2042... Two wet coats.

    I did switch to a standard sized touch-up gun this time for the clear. The 1.2mm tip really made a nice difference in how the clear went on. Was using my 0.6mm "detail" guns, but it wasn't wetting out the finish that well.

    I sprayed the color with the 0.6mm tips... Thinking I might try the 1.2mm next time for that as well.

    I didn't have a choice of tip size but I used the expensive harbor freight hvlp touch up gun. The cheap one does not flow well at all.
    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

      Comment

      • Darin Jordan
        Fast Electric Addict!
        • Apr 2007
        • 8332
        #77
        Wrapped her up this weekend. Prepped an ICE200 ESC for marine use, and added an RPM sensor and Voltage sensor to the ESC for use with my Spektrum SR4000T RX (which has built-in telemetry). Should be useful real-time information.

        I just need to add some floatation and fresh batteries and get some testing done. Hopefully next weekend.

        20160710_183724.jpg

        20160710_183739.jpg

        20160710_183813.jpg

        20160710_183823.jpg

        20160710_183959.jpg
        Darin E. Jordan - Renton, WA
        "Self-proclaimed skill-less leader in the hobby."

          Comment

          • Darin Jordan
            Fast Electric Addict!
            • Apr 2007
            • 8332
            #78
            A couple more shots...

            20160710_183732.jpg

            20160710_183755.jpg
            Darin E. Jordan - Renton, WA
            "Self-proclaimed skill-less leader in the hobby."

              Comment

              • Beaux
                Senior Member
                • Dec 2015
                • 550
                #79
                Nice! Looks like it's ready for business.

                  Comment

                  • kfxguy
                    Fast Electric Addict!
                    • Oct 2013
                    • 8750
                    #80
                    Nice clean setup!
                    32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

                      Comment

                      • kfxguy
                        Fast Electric Addict!
                        • Oct 2013
                        • 8750
                        #81
                        Originally posted by Darin Jordan View Post
                        Wrapped her up this weekend. Prepped an ICE200 ESC for marine use, and added an RPM sensor and Voltage sensor to the ESC for use with my Spektrum SR4000T RX (which has built-in telemetry). Should be useful real-time information.

                        I just need to add some floatation and fresh batteries and get some testing done. Hopefully next weekend.

                        [ATTACH=CONFIG]144402[/ATTACH]

                        [ATTACH=CONFIG]144403[/ATTACH]

                        [ATTACH=CONFIG]144404[/ATTACH]

                        [ATTACH=CONFIG]144405[/ATTACH]

                        [ATTACH=CONFIG]144406[/ATTACH]


                        What radio are you using?
                        32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

                          Comment

                          • Darin Jordan
                            Fast Electric Addict!
                            • Apr 2007
                            • 8332
                            #82
                            Originally posted by kfxguy View Post
                            What radio are you using?
                            Spektrum DX4R-Pro at the moment. There is a S/W update available on the Spektrum site that allows the earlier DX4R-Pro, and I think the DX4S, to work with the Telemetry. The recent ones would obviously come with it installed.

                            Darin E. Jordan - Renton, WA
                            "Self-proclaimed skill-less leader in the hobby."

                              Comment

                              • Boroda
                                Junior Member
                                • Jul 2016
                                • 6
                                #83
                                Darin, great job! Setup just as I like - clean and nice!
                                But after finished this thread still got couple of questions. As I understand you reinforce the transom with carbon sheet and after that make the threaded holes for transom hardware screws and do not use any nuts inside? What was the thickness of this carbon?
                                And could you please explain what is the reason to use this big tube in the transom for stuffing tube? How it help? Thanks!

                                  Comment

                                  Previous 1 3 4 5 6 template Next
                                  Working...