Kbb 34" mono build

[kfxguy]

I think he's just running (2) 3s packs for 6s, isn't he?
If so, there's no current sharing taking place, both packs are under the full load.

Two 3s packs. (2) 6s pack would be heeeeeavy! Look what it weighs with two 3s.....

[flraptor07]

Two 3s packs. (2) 6s pack would be heeeeeavy! Look what it weighs with two 3s.....

LOL Dude, that ain't heavy!! That Vern Kilmer Mono I have weighs almost 21lbs. RTR on 10s and the 1/8 scale Hydro I have weighs 18.4lbs RTR on 10s That KBB Mono is lite!!!

[flraptor07]

Very helpful. Thanks!!!!

No problem bro, I could tell the difference just swatting the throttle on the bench! Keith's right, you'll think it was only getting 1/2 throttle when you run it next time! Night a day difference....

[kfxguy]

No problem bro, I could tell the difference just swatting the throttle on the bench! Keith's right, you'll think it was only getting 1/2 throttle when you run it next time! Night a day difference....

ugh o.....this thing ought to move on out then! I know my prop is still too deep or the boat is riding too wet also for it to be pulling those types of amps. So far i really really like this motor/esc combo. Thats what the rivercat will be getting! I can just give my son that converted castle. I cant wait to run it again....might go out there wed. after work on the way home and run it again.

[Stevesc]

ugh o.....this thing ought to move on out then! I know my prop is still too deep or the boat is riding too wet also for it to be pulling those types of amps. So far i really really like this motor/esc combo. Thats what the rivercat will be getting! I can just give my son that converted castle. I cant wait to run it again....might go out there wed. after work on the way home and run it again.

Travis if I were you I would definatly get out and run it on Wednesday and make sure you have plenty of batteries charged up this time. Oh you may want to grab that Daytona too and give ithat a whirl...lol

[kfxguy]

Travis if I were you I would definatly get out and run it on Wednesday and make sure you have plenty of batteries charged up this time. Oh you may want to grab that Daytona too and give ithat a whirl...lol

i'll have to see. I wont be able to video it because my son wont be with me. Its almost not worth me going without video but i really want to get 70 out this mono. and breaking 80 with the daytona would be good too...it just is 10x better on video!

[Spartanator]

i'll have to see. I wont be able to video it because my son wont be with me. Its almost not worth me going without video but i really want to get 70 out this mono. and breaking 80 with the daytona would be good too...it just is 10x better on video!

We do enjoy the videos.... lol

I think he's just running (2) 3s packs for 6s, isn't he?
If so, there's no current sharing taking place, both packs are under the full load.

Y'all confuse me....

[Luck as a Constant]

ugh o.....this thing ought to move on out then! I know my prop is still too deep or the boat is riding too wet also for it to be pulling those types of amps. So far i really really like this motor/esc combo. Thats what the rivercat will be getting! I can just give my son that converted castle. I cant wait to run it again....might go out there wed. after work on the way home and run it again.

Actually, watching your vid, the ride looked pretty nice.
Raising the prop will def lower amp draw. There's a certain point where a prop really doesn't seem to gain any performance as far as depth goes. So just getting it to the point it hooks up nicely, without cavitation like crazy is a good place. Any deeper and the amps just go up.



Sent from my iPhone using Tapatalk

[kfxguy]

[QUOTE=Luck as a Constant;620767]Actually, watching your vid, the ride looked pretty nice.
Raising the prop will def lower amp draw. There's a certain point where a prop really doesn't seem to gain any performance as far as depth goes. So just getting it to the point it hooks up nicely, without cavitation like crazy is a good place. Any deeper and the amps just go up.
QUOTE]

Keith says it can be aired out a little more. I'm gonna try to raise the prop (gonna mark where it at right now) and go from there. I want to get the amp draw down. It kept getting faster as I raies the prop. I'm not sure why I stopped running it at the point I did. I guess I like fresh packs to do testing. Stay tuned, I'll be going back in a few days hopefully.

[kfxguy]

Oooooo holy sheet! I just re calibrated the throttle. I blipped it before to get an idea of the sound. Recalibrate it and did it again. Omg. It was a huge difference in sound! Huge!


Here's how the strut is adjust too btw.

[rearwheelin]

We do enjoy the videos.... lol



Y'all confuse me....

Here you go !

http://youtu.be/LhNcCa7jYDE

[kfxguy]

Here you go !

http://youtu.be/LhNcCa7jYDE

That's awesome! Lmao!

[rearwheelin]

That's awesome! Lmao!

Ha ha !!

[flraptor07]

Oooooo holy sheet! I just re calibrated the throttle. I blipped it before to get an idea of the sound. Recalibrate it and did it again. Omg. It was a huge difference in sound! Huge!


Here's how the strut is adjust too btw.

I told you!

[Spartanator]

Kbb 34" mono build

[QUOTE=rearwheelin;620777]Here you go !